Зашифровать и расшифровать строку в C #? - PullRequest
643 голосов
/ 14 октября 2008

Как я могу зашифровать и расшифровать строку в C #?

Ответы [ 28 ]

3 голосов
/ 25 июня 2014

Вот простой пример шифрования строк в C # с использованием режима AES CBC со случайными IV и HMAC и ключами, полученными из пароля, чтобы показать основные подвижные части:

private byte[] EncryptBytes(byte[] key, byte[] plaintext)
{
    using (var cipher = new RijndaelManaged { Key = key })
    {
        using (var encryptor = cipher.CreateEncryptor())
        {
            var ciphertext = encryptor.TransformFinalBlock(plaintext, 0, plaintext.Length);

            // IV is prepended to ciphertext
            return cipher.IV.Concat(ciphertext).ToArray();
        }
    }
}

private byte[] DecryptBytes(byte[] key, byte[] packed)
{
    using (var cipher = new RijndaelManaged { Key = key })
    {
        int ivSize = cipher.BlockSize / 8;

        cipher.IV = packed.Take(ivSize).ToArray();

        using (var encryptor = cipher.CreateDecryptor())
        {
            return encryptor.TransformFinalBlock(packed, ivSize, packed.Length - ivSize);
        }
    }
}

private byte[] AddMac(byte[] key, byte[] data)
{
    using (var hmac = new HMACSHA256(key))
    {
        var macBytes = hmac.ComputeHash(data);

        // HMAC is appended to data
        return data.Concat(macBytes).ToArray();
    }
}

private bool BadMac(byte[] found, byte[] computed)
{
    int mismatch = 0;

    // Aim for consistent timing regardless of inputs
    for (int i = 0; i < found.Length; i++)
    {
        mismatch += found[i] == computed[i] ? 0 : 1;
    }

    return mismatch != 0;
}

private byte[] RemoveMac(byte[] key, byte[] data)
{
    using (var hmac = new HMACSHA256(key))
    {
        int macSize = hmac.HashSize / 8;

        var packed = data.Take(data.Length - macSize).ToArray();

        var foundMac = data.Skip(packed.Length).ToArray();

        var computedMac = hmac.ComputeHash(packed);

        if (this.BadMac(foundMac, computedMac))
        {
            throw new Exception("Bad MAC");
        }

        return packed;
    }            
}

private List<byte[]> DeriveTwoKeys(string password)
{
    var salt = new byte[] { 1, 2, 3, 4, 5, 6, 7, 8 };

    var kdf = new Rfc2898DeriveBytes(password, salt, 10000);

    var bytes = kdf.GetBytes(32); // Two keys 128 bits each

    return new List<byte[]> { bytes.Take(16).ToArray(), bytes.Skip(16).ToArray() };
}

public byte[] EncryptString(string password, String message)
{
    var keys = this.DeriveTwoKeys(password);

    var plaintext = Encoding.UTF8.GetBytes(message);

    var packed = this.EncryptBytes(keys[0], plaintext);

    return this.AddMac(keys[1], packed);
}

public String DecryptString(string password, byte[] secret)
{
    var keys = this.DeriveTwoKeys(password);

    var packed = this.RemoveMac(keys[1], secret);

    var plaintext = this.DecryptBytes(keys[0], packed);

    return Encoding.UTF8.GetString(plaintext);
}

public void Example()
{
    var password = "correcthorsebatterystaple";

    var secret = this.EncryptString(password, "Hello World");

    Console.WriteLine("secret: " + BitConverter.ToString(secret));

    var recovered = this.DecryptString(password, secret);

    Console.WriteLine(recovered);
}
3 голосов
/ 05 января 2017

Альтернативой BouncyCastle для AES-GCM является шифрование libsodium-net . Обертывает библиотеку libsodium C. Одним приятным преимуществом является то, что он использует расширение AES-NI в процессорах для очень быстрого шифрования. Недостатком является то, что он не будет работать вообще, если процессор не имеет расширения. Там нет программного обеспечения отступить.

2 голосов
/ 02 октября 2013

Это класс, который был размещен здесь Бреттом. Однако я внес небольшое изменение, поскольку получал сообщение об ошибке «Недопустимая длина для массива символов Base-64» при его использовании для строк URL для шифрования и дешифрования.

public class CryptoURL
{
    private static byte[] _salt = Encoding.ASCII.GetBytes("Catto_Salt_Enter_Any_Value99");

    /// <summary>
    /// Encrypt the given string using AES.  The string can be decrypted using 
    /// DecryptStringAES().  The sharedSecret parameters must match. 
    /// The SharedSecret for the Password Reset that is used is in the next line
    ///  string sharedSecret = "OneUpSharedSecret9";
    /// </summary>
    /// <param name="plainText">The text to encrypt.</param>
    /// <param name="sharedSecret">A password used to generate a key for encryption.</param>
    public static string EncryptString(string plainText, string sharedSecret)
    {
        if (string.IsNullOrEmpty(plainText))
            throw new ArgumentNullException("plainText");
        if (string.IsNullOrEmpty(sharedSecret))
            throw new ArgumentNullException("sharedSecret");

        string outStr = null;                       // Encrypted string to return
        RijndaelManaged aesAlg = null;              // RijndaelManaged object used to encrypt the data.

        try
        {
            // generate the key from the shared secret and the salt
            Rfc2898DeriveBytes key = new Rfc2898DeriveBytes(sharedSecret, _salt);

            // Create a RijndaelManaged object
            aesAlg = new RijndaelManaged();
            aesAlg.Key = key.GetBytes(aesAlg.KeySize / 8);

            // Create a decryptor to perform the stream transform.
            ICryptoTransform encryptor = aesAlg.CreateEncryptor(aesAlg.Key, aesAlg.IV);

            // Create the streams used for encryption.
            using (MemoryStream msEncrypt = new MemoryStream())
            {
                // prepend the IV
                msEncrypt.Write(BitConverter.GetBytes(aesAlg.IV.Length), 0, sizeof(int));
                msEncrypt.Write(aesAlg.IV, 0, aesAlg.IV.Length);
                using (CryptoStream csEncrypt = new CryptoStream(msEncrypt, encryptor, CryptoStreamMode.Write))
                {
                    using (StreamWriter swEncrypt = new StreamWriter(csEncrypt))
                    {
                        //Write all data to the stream.
                        swEncrypt.Write(plainText);
                    }
                }

                outStr = HttpServerUtility.UrlTokenEncode(msEncrypt.ToArray());
                //outStr = Convert.ToBase64String(msEncrypt.ToArray());
                // you may need to add a reference. right click reference in solution explorer => "add Reference" => .NET tab => select "System.Web"
            }
        }
        finally
        {
            // Clear the RijndaelManaged object.
            if (aesAlg != null)
                aesAlg.Clear();
        }

        // Return the encrypted bytes from the memory stream.
        return outStr;
    }

    /// <summary>
    /// Decrypt the given string.  Assumes the string was encrypted using 
    /// EncryptStringAES(), using an identical sharedSecret.
    /// </summary>
    /// <param name="cipherText">The text to decrypt.</param>
    /// <param name="sharedSecret">A password used to generate a key for decryption.</param>
    public static string DecryptString(string cipherText, string sharedSecret)
    {
        if (string.IsNullOrEmpty(cipherText))
            throw new ArgumentNullException("cipherText");
        if (string.IsNullOrEmpty(sharedSecret))
            throw new ArgumentNullException("sharedSecret");

        // Declare the RijndaelManaged object
        // used to decrypt the data.
        RijndaelManaged aesAlg = null;

        // Declare the string used to hold
        // the decrypted text.
        string plaintext = null;

        byte[] inputByteArray;

        try
        {
            // generate the key from the shared secret and the salt
            Rfc2898DeriveBytes key = new Rfc2898DeriveBytes(sharedSecret, _salt);

            // Create the streams used for decryption.                
            //byte[] bytes = Convert.FromBase64String(cipherText);
            inputByteArray = HttpServerUtility.UrlTokenDecode(cipherText);

            using (MemoryStream msDecrypt = new MemoryStream(inputByteArray))
            {
                // Create a RijndaelManaged object
                // with the specified key and IV.
                aesAlg = new RijndaelManaged();
                aesAlg.Key = key.GetBytes(aesAlg.KeySize / 8);
                // Get the initialization vector from the encrypted stream
                aesAlg.IV = ReadByteArray(msDecrypt);
                // Create a decrytor to perform the stream transform.
                ICryptoTransform decryptor = aesAlg.CreateDecryptor(aesAlg.Key, aesAlg.IV);
                using (CryptoStream csDecrypt = new CryptoStream(msDecrypt, decryptor, CryptoStreamMode.Read))
                {
                    using (StreamReader srDecrypt = new StreamReader(csDecrypt))

                        // Read the decrypted bytes from the decrypting stream
                        // and place them in a string.
                        plaintext = srDecrypt.ReadToEnd();
                }
            }
        }
        catch (System.Exception ex)
        {
            return "ERROR";
            //throw ex;

        }
        finally
        {
            // Clear the RijndaelManaged object.
            if (aesAlg != null)
                aesAlg.Clear();
        }

        return plaintext;
    }

    static string ConvertStringArrayToString(string[] array)
    {
        //
        // Concatenate all the elements into a StringBuilder.
        //
        StringBuilder builder = new StringBuilder();
        foreach (string value in array)
        {
            builder.Append(value);
            builder.Append('.');
        }
        return builder.ToString();
    }

    private static byte[] ReadByteArray(Stream s)
    {
        byte[] rawLength = new byte[sizeof(int)];
        if (s.Read(rawLength, 0, rawLength.Length) != rawLength.Length)
        {
            throw new SystemException("Stream did not contain properly formatted byte array");
        }

        byte[] buffer = new byte[BitConverter.ToInt32(rawLength, 0)];
        if (s.Read(buffer, 0, buffer.Length) != buffer.Length)
        {
            throw new SystemException("Did not read byte array properly");
        }

        return buffer;
    }

}
2 голосов
/ 07 мая 2019

Следующий код является улучшенной версией ответа Газаль на аналогичный вопрос .

public class EncryptionHelper
{
    private Aes aesEncryptor;

    public EncryptionHelper()
    {
    }

    private void BuildAesEncryptor(string key)
    {
        aesEncryptor = Aes.Create();
        var pdb = new Rfc2898DeriveBytes(key, new byte[] { 0x49, 0x76, 0x61, 0x6e, 0x20, 0x4d, 0x65, 0x64, 0x76, 0x65, 0x64, 0x65, 0x76 });
        aesEncryptor.Key = pdb.GetBytes(32);
        aesEncryptor.IV = pdb.GetBytes(16);
    }

    public string EncryptString(string clearText, string key)
    {
        BuildAesEncryptor(key);
        var clearBytes = Encoding.Unicode.GetBytes(clearText);
        using (var ms = new MemoryStream())
        {
            using (var cs = new CryptoStream(ms, aesEncryptor.CreateEncryptor(), CryptoStreamMode.Write))
            {
                cs.Write(clearBytes, 0, clearBytes.Length);
            }
            var encryptedText = Convert.ToBase64String(ms.ToArray());
            return encryptedText;
        }
    }

    public string DecryptString(string cipherText, string key)
    {
        BuildAesEncryptor(key);
        cipherText = cipherText.Replace(" ", "+");
        var cipherBytes = Convert.FromBase64String(cipherText);
        using (var ms = new MemoryStream())
        {
            using (var cs = new CryptoStream(ms, aesEncryptor.CreateDecryptor(), CryptoStreamMode.Write))
            {
                cs.Write(cipherBytes, 0, cipherBytes.Length);
            }
            var clearText = Encoding.Unicode.GetString(ms.ToArray());
            return clearText;
        }
    }
}
2 голосов
/ 11 октября 2018
using System;
using System.IO;
using System.Security.Cryptography;
using System.Text;

public class Program
{
    public static void Main()
    {
        var key = Encoding.UTF8.GetBytes("SUkbqO2ycDo7QwpR25kfgmC7f8CoyrZy");
        var data = Encoding.UTF8.GetBytes("testData");

        //Encrypt data
        var encrypted = CryptoHelper.EncryptData(data,key);

        //Decrypt data
        var decrypted = CryptoHelper.DecryptData(encrypted,key);

        //Display result
        Console.WriteLine(Encoding.UTF8.GetString(decrypted));
    }
}

public static class CryptoHelper
{
    public static byte[] EncryptData(byte[] data, byte[] key)
    {
        using (var aesAlg = Aes.Create())
        {
            aesAlg.Mode = CipherMode.CBC;
            using (var encryptor = aesAlg.CreateEncryptor(key, aesAlg.IV))
            {
                using (var msEncrypt = new MemoryStream())
                {
                    msEncrypt.Write(aesAlg.IV, 0, aesAlg.IV.Length);

                    using (var csEncrypt = new CryptoStream(msEncrypt, encryptor, CryptoStreamMode.Write))
                        csEncrypt.Write(data, 0, data.Length);

                    return msEncrypt.ToArray();
                }
            }
        }

    }

    public static byte[] DecryptData(byte[] encrypted, byte[] key)
    {
        var iv = new byte[16];
        Buffer.BlockCopy(encrypted, 0, iv, 0, iv.Length);
        using (var aesAlg = Aes.Create())
        {
            aesAlg.Mode = CipherMode.CBC;
            using (var decryptor = aesAlg.CreateDecryptor(key, iv))
            {
                using (var msDecrypt = new MemoryStream(encrypted, iv.Length, encrypted.Length - iv.Length))
                {
                    using (var csDecrypt = new CryptoStream(msDecrypt, decryptor, CryptoStreamMode.Read))
                    {
                        using (var resultStream = new MemoryStream())
                        {
                            csDecrypt.CopyTo(resultStream);
                            return resultStream.ToArray();
                        }
                    }
                }
            }
        }
    }
}
1 голос
/ 17 мая 2019

В следующем примере показано, как зашифровать и расшифровать данные примера:

    // This constant is used to determine the keysize of the encryption algorithm in bits.
    // We divide this by 8 within the code below to get the equivalent number of bytes.
    private const int Keysize = 128;

    // This constant determines the number of iterations for the password bytes generation function.
    private const int DerivationIterations = 1000;

    public static string Encrypt(string plainText, string passPhrase)
    {
        // Salt and IV is randomly generated each time, but is preprended to encrypted cipher text
        // so that the same Salt and IV values can be used when decrypting.  
        var saltStringBytes = GenerateBitsOfRandomEntropy(16);
        var ivStringBytes = GenerateBitsOfRandomEntropy(16);
        var plainTextBytes = Encoding.UTF8.GetBytes(plainText);
        using (var password = new Rfc2898DeriveBytes(passPhrase, saltStringBytes, DerivationIterations))
        {
            var keyBytes = password.GetBytes(Keysize / 8);
            using (var symmetricKey = new RijndaelManaged())
            {
                symmetricKey.BlockSize = 128;
                symmetricKey.Mode = CipherMode.CBC;
                symmetricKey.Padding = PaddingMode.PKCS7;
                using (var encryptor = symmetricKey.CreateEncryptor(keyBytes, ivStringBytes))
                {
                    using (var memoryStream = new MemoryStream())
                    {
                        using (var cryptoStream = new CryptoStream(memoryStream, encryptor, CryptoStreamMode.Write))
                        {
                            cryptoStream.Write(plainTextBytes, 0, plainTextBytes.Length);
                            cryptoStream.FlushFinalBlock();
                            // Create the final bytes as a concatenation of the random salt bytes, the random iv bytes and the cipher bytes.
                            var cipherTextBytes = saltStringBytes;
                            cipherTextBytes = cipherTextBytes.Concat(ivStringBytes).ToArray();
                            cipherTextBytes = cipherTextBytes.Concat(memoryStream.ToArray()).ToArray();
                            memoryStream.Close();
                            cryptoStream.Close();
                            return Convert.ToBase64String(cipherTextBytes);
                        }
                    }
                }
            }
        }
    }

    public static string Decrypt(string cipherText, string passPhrase)
    {
        // Get the complete stream of bytes that represent:
        // [32 bytes of Salt] + [32 bytes of IV] + [n bytes of CipherText]
        var cipherTextBytesWithSaltAndIv = Convert.FromBase64String(cipherText);
        // Get the saltbytes by extracting the first 32 bytes from the supplied cipherText bytes.
        var saltStringBytes = cipherTextBytesWithSaltAndIv.Take(Keysize / 8).ToArray();
        // Get the IV bytes by extracting the next 32 bytes from the supplied cipherText bytes.
        var ivStringBytes = cipherTextBytesWithSaltAndIv.Skip(Keysize / 8).Take(Keysize / 8).ToArray();
        // Get the actual cipher text bytes by removing the first 64 bytes from the cipherText string.
        var cipherTextBytes = cipherTextBytesWithSaltAndIv.Skip((Keysize / 8) * 2).Take(cipherTextBytesWithSaltAndIv.Length - ((Keysize / 8) * 2)).ToArray();

        using (var password = new Rfc2898DeriveBytes(passPhrase, saltStringBytes, DerivationIterations))
        {
            var keyBytes = password.GetBytes(Keysize / 8);
            using (var symmetricKey = new RijndaelManaged())
            {
                symmetricKey.BlockSize = 128;
                symmetricKey.Mode = CipherMode.CBC;
                symmetricKey.Padding = PaddingMode.PKCS7;
                using (var decryptor = symmetricKey.CreateDecryptor(keyBytes, ivStringBytes))
                {
                    using (var memoryStream = new MemoryStream(cipherTextBytes))
                    {
                        using (var cryptoStream = new CryptoStream(memoryStream, decryptor, CryptoStreamMode.Read))
                        {
                            var plainTextBytes = new byte[cipherTextBytes.Length];
                            var decryptedByteCount = cryptoStream.Read(plainTextBytes, 0, plainTextBytes.Length);
                            memoryStream.Close();
                            cryptoStream.Close();
                            return Encoding.UTF8.GetString(plainTextBytes, 0, decryptedByteCount);
                        }
                    }
                }
            }
        }
    }

    private static byte[] GenerateBitsOfRandomEntropy(int size)
    {
        // 32 Bytes will give us 256 bits.
        // 16 Bytes will give us 128 bits.
        var randomBytes = new byte[size]; 
        using (var rngCsp = new RNGCryptoServiceProvider())
        {
            // Fill the array with cryptographically secure random bytes.
            rngCsp.GetBytes(randomBytes);
        }
        return randomBytes;
    }
1 голос
/ 26 октября 2016

Шифрование является очень распространенным явлением в программировании. Я думаю, что лучше установить пакет, чтобы выполнить задачу за вас. Может быть, простой проект Nuget с открытым исходным кодом, как Простое шифрование Aes

Ключ находится в файле конфигурации, поэтому его легко изменить в производственной среде, и я не вижу никаких недостатков

<MessageEncryption>
  <EncryptionKey KeySize="256" Key="3q2+796tvu/erb7v3q2+796tvu/erb7v3q2+796tvu8="/>
</MessageEncryption>
0 голосов
/ 01 декабря 2014

Вы должны использовать пространство имен, используя System.Security.Cryptography; и useHashing - это тип bool true или false. Строковая переменная «ключ» должна быть одинаковой для Шифрования и для Шифрования

//Encryption
public string EncryptText(string toEncrypt, bool useHashing)
    {
        try
        {
            byte[] keyArray;
            byte[] toEncryptArray = UTF8Encoding.UTF8.GetBytes(toEncrypt);

            string key = "String Key Value"; //Based on this key stirng is encrypting
            //System.Windows.Forms.MessageBox.Show(key);
            //If hashing use get hashcode regards to your key
            if (useHashing)
            {
                MD5CryptoServiceProvider hashmd5 = new MD5CryptoServiceProvider();
                keyArray = hashmd5.ComputeHash(UTF8Encoding.UTF8.GetBytes(key));
                //Always release the resources and flush data
                //of the Cryptographic service provide. Best Practice

                hashmd5.Clear();
            }
            else
                keyArray = UTF8Encoding.UTF8.GetBytes(key);

            TripleDESCryptoServiceProvider tdes = new TripleDESCryptoServiceProvider();
            //set the secret key for the tripleDES algorithm
            tdes.Key = keyArray;
            //mode of operation. there are other 4 modes. We choose ECB(Electronic code Book)
            tdes.Mode = CipherMode.ECB;
            //padding mode(if any extra byte added)
            tdes.Padding = PaddingMode.PKCS7;

            ICryptoTransform cTransform = tdes.CreateEncryptor();
            //transform the specified region of bytes array to resultArray
            byte[] resultArray = cTransform.TransformFinalBlock(toEncryptArray, 0,          toEncryptArray.Length);
            //Release resources held by TripleDes Encryptor
            tdes.Clear();
            //Return the encrypted data into unreadable string format
            return Convert.ToBase64String(resultArray, 0, resultArray.Length);
        }
        catch (Exception e)
        {
            throw e;
        }
    }

    //Decryption
    public string DecryptText(string cipherString, bool useHashing)
    {

        try
        {
            byte[] keyArray;
            //get the byte code of the string

            byte[] toEncryptArray = Convert.FromBase64String(cipherString);

            string key = "String Key Value"; //Based on this key string is decrypted

            if (useHashing)
            {
                //if hashing was used get the hash code with regards to your key
                MD5CryptoServiceProvider hashmd5 = new MD5CryptoServiceProvider();
                keyArray = hashmd5.ComputeHash(UTF8Encoding.UTF8.GetBytes(key));
                //release any resource held by the MD5CryptoServiceProvider

                hashmd5.Clear();
            }
            else
            {
                //if hashing was not implemented get the byte code of the key
                keyArray = UTF8Encoding.UTF8.GetBytes(key);
            }

            TripleDESCryptoServiceProvider tdes = new TripleDESCryptoServiceProvider();
            //set the secret key for the tripleDES algorithm
            tdes.Key = keyArray;
            //mode of operation. there are other 4 modes.
            //We choose ECB(Electronic code Book)

            tdes.Mode = CipherMode.ECB;
            //padding mode(if any extra byte added)
            tdes.Padding = PaddingMode.PKCS7;

            ICryptoTransform cTransform = tdes.CreateDecryptor();
            byte[] resultArray = cTransform.TransformFinalBlock
                    (toEncryptArray, 0, toEncryptArray.Length);
            //Release resources held by TripleDes Encryptor
            tdes.Clear();
            //return the Clear decrypted TEXT
            return UTF8Encoding.UTF8.GetString(resultArray);
        }
        catch (Exception ex)
        {
            throw ex;
        }
    }
0 голосов
/ 11 октября 2018

Вот пример , как можно выполнить шифрование / дешифрование AES-GCM с помощью пакета Bouncy castle.

Я нашел этот образец, когда его гуглили на возможность расшифровки данных из GOlang crypto/aes api:

const (
    gcmBlockSize         = 16 // this is key size
    gcmTagSize           = 16 // this is mac
    gcmStandardNonceSize = 12 // this is nonce
)

func encrypt(data []byte, passphrase string) []byte {
    block, _ := aes.NewCipher([]byte(createHash(passphrase)))
    gcm, err := cipher.NewGCM(block)
    if err != nil {
        panic(err.Error())
    }
    nonce := make([]byte, gcm.NonceSize())
    if _, err = io.ReadFull(rand.Reader, nonce); err != nil {
        panic(err.Error())
    }
    ciphertext := gcm.Seal(nonce, nonce, data, nil)
    return ciphertext
}

.Net пример работает как брелок с ключом (256 бит), mac (128 бит) и nonce (96 бит).

0 голосов
/ 01 апреля 2011
using System;
using System.Data;
using System.Configuration;
using System.Text;
using System.Security.Cryptography;

namespace Encription
{
    class CryptorEngine
    {
        public static string Encrypt(string ToEncrypt, bool useHasing)
        {
            byte[] keyArray;
            byte[] toEncryptArray = UTF8Encoding.UTF8.GetBytes(ToEncrypt);
            //System.Configuration.AppSettingsReader settingsReader = new     AppSettingsReader();
           string Key = "Bhagwati";
            if (useHasing)
            {
                MD5CryptoServiceProvider hashmd5 = new MD5CryptoServiceProvider();
                keyArray = hashmd5.ComputeHash(UTF8Encoding.UTF8.GetBytes(Key));
                hashmd5.Clear();  
            }
            else
            {
                keyArray = UTF8Encoding.UTF8.GetBytes(Key);
            }
            TripleDESCryptoServiceProvider tDes = new TripleDESCryptoServiceProvider();
            tDes.Key = keyArray;
            tDes.Mode = CipherMode.ECB;
            tDes.Padding = PaddingMode.PKCS7;
            ICryptoTransform cTransform = tDes.CreateEncryptor();
            byte[] resultArray = cTransform.TransformFinalBlock(toEncryptArray, 0,     toEncryptArray.Length);
            tDes.Clear();
            return Convert.ToBase64String(resultArray, 0, resultArray.Length);
        }
        public static string Decrypt(string cypherString, bool useHasing)
        {
            byte[] keyArray;
            byte[] toDecryptArray = Convert.FromBase64String(cypherString);
            //byte[] toEncryptArray = Convert.FromBase64String(cypherString);
            //System.Configuration.AppSettingsReader settingReader = new     AppSettingsReader();
            string key = "Bhagwati";
            if (useHasing)
            {
                MD5CryptoServiceProvider hashmd = new MD5CryptoServiceProvider();
                keyArray = hashmd.ComputeHash(UTF8Encoding.UTF8.GetBytes(key));
                hashmd.Clear();
            }
            else
            {
                keyArray = UTF8Encoding.UTF8.GetBytes(key);
            }
            TripleDESCryptoServiceProvider tDes = new TripleDESCryptoServiceProvider();
            tDes.Key = keyArray;
            tDes.Mode = CipherMode.ECB;
            tDes.Padding = PaddingMode.PKCS7;
            ICryptoTransform cTransform = tDes.CreateDecryptor();
            try
            {
                byte[] resultArray = cTransform.TransformFinalBlock(toDecryptArray, 0,         toDecryptArray.Length);

                tDes.Clear();
                return UTF8Encoding.UTF8.GetString(resultArray,0,resultArray.Length);
            }
            catch (Exception ex)
            {
                throw ex;
             }
        }
    }
}
...