Только что закончил писать свой собственный парсер. Я попытался использовать различные парсеры, найденные здесь, но ни один из них не работает с ksh93 (AIX) и bash (Linux).
Это старый стиль программирования - разбор строки за строкой. Довольно быстро, поскольку он использовал несколько внешних команд. Немного медленнее из-за всех eval, необходимых для динамического имени массива.
INI поддерживает 3 специальных синтаксиса:
- includefile = ini file ->
Загрузите дополнительный INI-файл. Полезно для разделения ini на несколько файлов или повторного использования какой-либо части конфигурации
- включенный каталог = каталог ->
То же, что и includefile, но включает полный каталог
- includesection = section ->
Скопируйте существующий раздел в текущий раздел.
Я использовал весь синтаксис thoses, чтобы получить довольно сложный, многократно используемый ini-файл. Полезно для установки продуктов при установке новой ОС - мы много делаем.
Доступ к значениям можно получить с помощью $ {ini [$ section. $ Item]}. Массив ДОЛЖЕН быть определен до вызова этого.
Веселись. Надеюсь, это будет полезно для кого-то еще!
function Show_Debug {
[[ $DEBUG = YES ]] && echo "DEBUG $@"
}
function Fatal {
echo "$@. Script aborted"
exit 2
}
#-------------------------------------------------------------------------------
# This function load an ini file in the array "ini"
# The "ini" array must be defined in the calling program (typeset -A ini)
#
# It could be any array name, the default array name is "ini".
#
# There is heavy usage of "eval" since ksh and bash do not support
# reference variable. The name of the ini is passed as variable, and must
# be "eval" at run-time to work. Very specific syntax was used and must be
# understood before making any modifications.
#
# It complexify greatly the program, but add flexibility.
#-------------------------------------------------------------------------------
function Load_Ini {
Show_Debug "$0($@)"
typeset ini_file="$1"
# Name of the array to fill. By default, it's "ini"
typeset ini_array_name="${2:-ini}"
typeset section variable value line my_section file subsection value_array include_directory all_index index sections pre_parse
typeset LF="
"
if [[ ! -s $ini_file ]]; then
Fatal "The ini file is empty or absent in $0 [$ini_file]"
fi
include_directory=$(dirname $ini_file)
include_directory=${include_directory:-$(pwd)}
Show_Debug "include_directory=$include_directory"
section=""
# Since this code support both bash and ksh93, you cannot use
# the syntax "echo xyz|while read line". bash doesn't work like
# that.
# It forces the use of "<<<", introduced in bash and ksh93.
Show_Debug "Reading file $ini_file and putting the results in array $ini_array_name"
pre_parse="$(sed 's/^ *//g;s/#.*//g;s/ *$//g' <$ini_file | egrep -v '^$')"
while read line; do
if [[ ${line:0:1} = "[" ]]; then # Is the line starting with "["?
# Replace [section_name] to section_name by removing the first and last character
section="${line:1}"
section="${section%\]}"
eval "sections=\${$ini_array_name[sections_list]}"
sections="$sections${sections:+ }$section"
eval "$ini_array_name[sections_list]=\"$sections\""
Show_Debug "$ini_array_name[sections_list]=\"$sections\""
eval "$ini_array_name[$section.exist]=YES"
Show_Debug "$ini_array_name[$section.exist]='YES'"
else
variable=${line%%=*} # content before the =
value=${line#*=} # content after the =
if [[ $variable = includefile ]]; then
# Include a single file
Load_Ini "$include_directory/$value" "$ini_array_name"
continue
elif [[ $variable = includedir ]]; then
# Include a directory
# If the value doesn't start with a /, add the calculated include_directory
if [[ $value != /* ]]; then
value="$include_directory/$value"
fi
# go thru each file
for file in $(ls $value/*.ini 2>/dev/null); do
if [[ $file != *.ini ]]; then continue; fi
# Load a single file
Load_Ini "$file" "$ini_array_name"
done
continue
elif [[ $variable = includesection ]]; then
# Copy an existing section into the current section
eval "all_index=\"\${!$ini_array_name[@]}\""
# It's not necessarily fast. Need to go thru all the array
for index in $all_index; do
# Only if it is the requested section
if [[ $index = $value.* ]]; then
# Evaluate the subsection [section.subsection] --> subsection
subsection=${index#*.}
# Get the current value (source section)
eval "value_array=\"\${$ini_array_name[$index]}\""
# Assign the value to the current section
# The $value_array must be resolved on the second pass of the eval, so make sure the
# first pass doesn't resolve it (\$value_array instead of $value_array).
# It must be evaluated on the second pass in case there is special character like $1,
# or ' or " in it (code).
eval "$ini_array_name[$section.$subsection]=\"\$value_array\""
Show_Debug "$ini_array_name[$section.$subsection]=\"$value_array\""
fi
done
fi
# Add the value to the array
eval "current_value=\"\${$ini_array_name[$section.$variable]}\""
# If there's already something for this field, add it with the current
# content separated by a LF (line_feed)
new_value="$current_value${current_value:+$LF}$value"
# Assign the content
# The $new_value must be resolved on the second pass of the eval, so make sure the
# first pass doesn't resolve it (\$new_value instead of $new_value).
# It must be evaluated on the second pass in case there is special character like $1,
# or ' or " in it (code).
eval "$ini_array_name[$section.$variable]=\"\$new_value\""
Show_Debug "$ini_array_name[$section.$variable]=\"$new_value\""
fi
done <<< "$pre_parse"
Show_Debug "exit $0($@)\n"
}