Я использую " CL-SOM-AM57x - TI AM5728 / AM5718 System-on-Module ".
Я пытался установить Yocto Linux, предоставляемый compulab: Ссылка .
Я выбираю автоматическую установку, но после установки получаю ошибку и не могу запустить Yocto Linux на этом устройстве. ( Инструкции по автоматической установке )
Я разместил ошибку ниже. Как правильно установить Yocto Linux? Почему произошла эта ошибка?
Hit any key to stop autoboot: 0
Saving Environment to SPI Flash...
SF: Detected w25q16cl with page size 256 Bytes, erase size 4 KiB, total 2 MiB,
mapped at 5c000000
Erasing SPI flash...Writing to SPI flash...done
switch to partitions #0, OK
mmc1(part 0) is current device
** File not found kernel.img **
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
No FDT memory address configured. Please configure
the FDT address via "fdt addr <address>" command.
Aborting!
No FDT memory address configured. Please configure
the FDT address via "fdt addr <address>" command.
Aborting!
No FDT memory address configured. Please configure
the FDT address via "fdt addr <address>" command.
Aborting!
No FDT memory address configured. Please configure
the FDT address via "fdt addr <address>" command.
Aborting!
No FDT memory address configured. Please configure
the FDT address via "fdt addr <address>" command.
Aborting!
No FDT memory address configured. Please configure
the FDT address via "fdt addr <address>" command.
Aborting!
No FDT memory address configured. Please configure
the FDT address via "fdt addr <address>" command.
Aborting!
No FDT memory address configured. Please configure
the FDT address via "fdt addr <address>" command.
Aborting!
No FDT memory address configured. Please configure
the FDT address via "fdt addr <address>" command.
Aborting!
No FDT memory address configured. Please configure
the FDT address via "fdt addr <address>" command.
Aborting!
ERROR: Did not find a cmdline Flattened Device Tree
Could not find a valid device tree