Я пытаюсь синхронизировать данные между двумя узлами в bigchaindb с помощью tendermint.Я установил bigchaindb и он работает правильно, и я могу получить доступ к IP-адресу в обоих узлах друг друга.Когда я бью свой IP, я получаю страницу bigchaindb json.Проблема после запуска monit -d 1 В одном узле я готовлю весь процесс с помощью команды OK status в monit summary. Но в другом узле статус тендерной остановки Execution Failed | Does not exist
Моя страница генезиса:
{
"genesis_time": "2019-02-09T04:47:14.318490806Z",
"chain_id": "test-chain-Tvjwee",
"consensus_params": {
"block_size_params": {
"max_bytes": "22020096",
"max_txs": "10000",
"max_gas": "-1"
},
"tx_size_params": {
"max_bytes": "10240",
"max_gas": "-1"
},
"block_gossip_params": {
"block_part_size_bytes": "65536"
},
"evidence_params": {
"max_age": "100000"
}
},
"validators": [
{
"pub_key": {
"type": "tendermint/PubKeyEd25519",
"value": "/E6Th9SaZuO3URCAQDeX7IREYJ/8vLZYLqORznC4dHU="
},
"power": "5",
"name": "93_IP"
},
{
"pub_key": {
"type": "tendermint/PubKeyEd25519",
"value": "BAQG/PH+5gZ+wsmJL/JiyI1CabHHL06U8C8c5N14ni4="
},
"power": "5",
"name": "92_IP"
}
],
"app_hash": ""
}
И мой файл config.toml:
# This is a TOML config file.
# For more information, see https://github.com/toml-lang/toml
##### main base config options #####
# TCP or UNIX socket address of the ABCI application,
# or the name of an ABCI application compiled in with the Tendermint binary
proxy_app = "tcp://127.0.0.1:26658"
moniker = "user-VirtualBox_93"
fast_sync = true
# Database backend: leveldb | memdb
db_backend = "leveldb"
# Database directory
db_path = "data"
# Output level for logging, including package level options
log_level = "main:info,state:info,*:error"
##### additional base config options #####
# Path to the JSON file containing the initial validator set and other meta data
genesis_file = "config/genesis.json"
# Path to the JSON file containing the private key to use as a validator in the consensus protocol
priv_validator_file = "config/priv_validator.json"
node_key_file = "config/node_key.json"
abci = "socket"
prof_laddr = ""
filter_peers = false
##### advanced configuration options #####
##### rpc server configuration options #####
[rpc]
# TCP or UNIX socket address for the RPC server to listen on
laddr = "tcp://0.0.0.0:26657"
# TCP or UNIX socket address for the gRPC server to listen on
# NOTE: This server only supports /broadcast_tx_commit
grpc_laddr = ""
# Maximum number of simultaneous connections.
# Does not include RPC (HTTP&WebSocket) connections. See max_open_connections
# If you want to accept more significant number than the default, make sure
# you increase your OS limits.
# 0 - unlimited.
grpc_max_open_connections = 900
# Activate unsafe RPC commands like /dial_seeds and /unsafe_flush_mempool
unsafe = false
# Maximum number of simultaneous connections (including WebSocket).
# Does not include gRPC connections. See grpc_max_open_connections
# If you want to accept more significant number than the default, make sure
# you increase your OS limits.
# 0 - unlimited.
max_open_connections = 900
##### peer to peer configuration options #####
[p2p]
# Address to listen for incoming connections
laddr = "tcp://0.0.0.0:26656"
# Address to advertise to peers for them to dial
# If empty, will use the same port as the laddr,
# and will introspect on the listener or use UPnP
# to figure out the address.
external_address = ""
# Comma separated list of seed nodes to connect to
seeds = ""
# Comma separated list of nodes to keep persistent connections to
persistent_peers = "10a1b37138d6630e653914c542a00d791c50761a@172.61.24.93:26656,\
7b7af6ca3ea9b09d6a94bc03c5a409dd3e00e120@172.61.24.92:26656,"
# UPNP port forwarding
upnp = false
# Path to address book
addr_book_file = "config/addrbook.json"
# Set true for strict address routability rules
addr_book_strict = true
# Time to wait before flushing messages out on the connection, in ms
flush_throttle_timeout = 100
# Maximum number of peers to connect to
max_num_peers = 50
# Maximum size of a message packet payload, in bytes
max_packet_msg_payload_size = 1024
# Rate at which packets can be sent, in bytes/second
send_rate = 102400000
# Rate at which packets can be received, in bytes/second
recv_rate = 102400000
# Set true to enable the peer-exchange reactor
pex = true
# Seed mode, in which node constantly crawls the network and looks for
# peers. If another node asks it for addresses, it responds and disconnects.
#
# Does not work if the peer-exchange reactor is disabled.
seed_mode = false
# Comma separated list of peer IDs to keep private (will not be gossiped to other peers)
private_peer_ids = ""
##### mempool configuration options #####
[mempool]
recheck = false
recheck_empty = true
broadcast = true
wal_dir = "data/mempool.wal"
# size of the mempool
size = 100000
# size of the cache (used to filter transactions we saw earlier)
cache_size = 100000
##### consensus configuration options #####
[consensus]
wal_file = "data/cs.wal/wal"
# All timeouts are in milliseconds
timeout_propose = 3000
timeout_propose_delta = 500
timeout_prevote = 1000
timeout_prevote_delta = 500
timeout_precommit = 1000
timeout_precommit_delta = 500
timeout_commit = 1000
# Make progress as soon as we have all the precommits (as if TimeoutCommit = 0)
skip_timeout_commit = false
# EmptyBlocks mode and possible interval between empty blocks in seconds
create_empty_blocks = false
create_empty_blocks_interval = 0
# Reactor sleep duration parameters are in milliseconds
peer_gossip_sleep_duration = 100
peer_query_maj23_sleep_duration = 2000
##### transactions indexer configuration options #####
[tx_index]
# What indexer to use for transactions
#
# Options:
# 1) "null" (default)
# 2) "kv" - the simplest possible indexer, backed by key-value storage (defaults to levelDB; see DBBackend).
indexer = "kv"
# Comma-separated list of tags to index (by default the only tag is tx hash)
#
# It's recommended to index only a subset of tags due to possible memory
# bloat. This is, of course, depends on the indexer's DB and the volume of
# transactions.
index_tags = ""
index_all_tags = false
##### instrumentation configuration options #####
[instrumentation]
# When true, Prometheus metrics are served under /metrics on
# PrometheusListenAddr.
# Check out the documentation for the list of available metrics.
prometheus = false
# Address to listen for Prometheus collector(s) connections
prometheus_listen_addr = ":26660"
# Maximum number of simultaneous connections.
# If you want to accept more significant number than the default, make sure
# you increase your OS limits.
# 0 - unlimited.
max_open_connections = 3
Я думаю, из-за этого моя БД не синхронизируется.Можете ли вы помочь мне здесь.