Мне нужен проект для школы, и мне нужно отправить электронное письмо, когда датчик температуры на моем Arduino достигнет определенной степени. Так как мне удобнее всего java, я отправил почтовый отправитель на java с Java Mail API. Теперь мне нужно только соединить мою программу в Arduino IDE и отправителя почты на java, чтобы электронное письмо отправлялось при повышении температуры. Мой код в Arduino также включает веб-сайт, но это не имеет никакого отношения к моей проблеме. вот мой код в Arduino:
#include <dht.h>
#include <SPI.h>
#include <Ethernet.h>
dht DHT;
#define DHT11_PIN 7 // what pin we're connected to
byte mac[] = { 0xA8, 0x61, 0x0A, 0xAE, 0x3A, 0xC4 };
EthernetServer server(80);
#define DHTTYPE DHT11 // DHT 11
void setup() {
// Open serial communications and wait for port to open:
Serial.begin(9600);
while (!Serial) {
; // wait for serial port to connect. Needed for Leonardo only
}
// start the Ethernet connection and the server:
Ethernet.begin(mac);
server.begin();
Serial.print("server is at ");
Serial.println(Ethernet.localIP());
}
void loop() {
int chk = DHT.read11(DHT11_PIN);
Serial.print("Temperature = ");
Serial.println(DHT.temperature);
Serial.print("Humidity = ");
Serial.println(DHT.humidity);
delay(2000);
// check if returns are valid, if they are NaN (not a number) then something went wrong!
/* if (isnan(DHT.temperature) || isnan(DHT.humidity)) {
Serial.println("Failed to read from DHT");
} else {
Serial.print("Humidity: ");
Serial.print(DHT.humidity);
Serial.print(" %\t");
Serial.print("Temperature: ");
Serial.print(DHT.temperature);
Serial.println(" *C");
}*/
// listen for incoming clients
EthernetClient client = server.available();
if (client) {
Serial.println("new client");
// an http request ends with a blank line
boolean currentLineIsBlank = true;
while (client.connected()) {
if (client.available()) {
char c = client.read();
Serial.write(c);
// if you've gotten to the end of the line (received a newline
// character) and the line is blank, the http request has ended,
// so you can send a reply
if (c == '\n' && currentLineIsBlank) {
// send a standard http response header
client.println("HTTP/1.1 200 OK");
client.println("Content-Type: text/html");
client.println("Connection: close"); // the connection will be closed after completion of the response
client.println("Refresh: 5"); // refresh the page automatically every 5 sec
client.println();
client.println("<!DOCTYPE HTML>");
client.println("<html>");
//client.println("<script> alert('TEST'); </script>");
// output the value of the DHT-11
client.println("<H2>");
client.print("Humidity: ");
client.println("</H2>");
client.println("<p />");
client.println("<H1>");
client.print(DHT.humidity);
client.print(" %\t");
client.println("</H1>");
client.println("<p />");
client.println("<H2>");
client.print("Temperature: ");
client.println("</H2>");
client.println("<H1>");
client.print(DHT.temperature);
client.println("°");
client.println("C");
client.println("</H1>");
client.println("</html>");
break;
}
if (c == '\n') {
// you're starting a new line
currentLineIsBlank = true;
}
else if (c != '\r') {
// you've gotten a character on the current line
currentLineIsBlank = false;
}
}
}
// give the web browser time to receive the data
delay(1);
// close the connection:
client.stop();
Serial.println("client disonnected");
}
}