Я настроил Zookeeper и kafka server на 2 разных серверах (34.196.151.95:9092,3.213.212.236:9092) и выполнил следующие шаги на 2 разных серверах для тестирования и ниже URL - https://www.instaclustr.com/support/documentation/kafka/accessing-and-using-kafka/use-kafka-with-c/
- первый сервер: 34.196.151.95:9092 для topi c - test124 и pattions - 3
cd E:\Kafka\kafka_2.12-2.3.0
bin\windows\zookeeper-server-start.bat config/zookeeper.properties
bin\windows\kafka-server-start.bat config/server.properties
bin\windows\kafka-topics.bat --create --bootstrap-server localhost:9092 --replication-factor 1 --partitions 3 --topic test124
- 2-й сервер: 3.213.212.236 : 9092 для topi c - test123 и pattions - 2
cd E:\Kafka\kafka_2.12-2.3.0
bin\windows\zookeeper-server-start.bat config/zookeeper.properties
bin\windows\kafka-server-start.bat config/server.properties
bin\windows\kafka-topics.bat --create --bootstrap-server localhost:9092 --replication-factor 1 --partitions 2 --topic test123
var config = new ConsumerConfig
{
BootstrapServers = "34.196.151.95:9092,3.213.212.236:9092",//.KAFKA_BOOTSTRAP_SERVER,
EnableAutoCommit = false,
GroupId = ConfigurationParameters.KAFKA_GROUP_ID,
};
GetAutoOffsetResetValue(ConfigurationParameters.KAFKA_AUTO_OFFSET_RESET, config);
config.FetchMinBytes = ConfigurationParameters.KAFKA_FETCH_MIN_BYTES;
config.FetchWaitMaxMs = ConfigurationParameters.KAFKA_FETCH_WAIT_MAX_MILISECONDS;
config.SocketTimeoutMs = ConfigurationParameters.KAFKA_FETCH_WAIT_MAX_MILISECONDS + 10000;
config.SessionTimeoutMs = ConfigurationParameters.KAFKA_SESSION_TIMEOUT_MILISECONDS;
config.MaxPollIntervalMs = ConfigurationParameters.KAFKA_MAX_POLL_INTERVAL_MILISECONDS;
consumerBuilder = new ConsumerBuilder<Ignore, string>(config).SetValueDeserializer(Deserializers.Utf8).Build();
var topicPartition = GetTopicPartitionOffset();
if (ConfigurationParameters.KAFKA_ASSIGN_OFFSET && !subscribeKafkaTopic)
{
consumerBuilder.Assign(topicPartition);
}
else
{
consumerBuilder.Subscribe(new string[] { "test123", "test124" });
}
На обоих серверах файл Server.properties имеет одинаковую конфигурацию
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements. See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The ASF licenses this file to You under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# see kafka.server.KafkaConfig for additional details and defaults
############################# Server Basics #############################
# The id of the broker. This must be set to a unique integer for each broker.
broker.id=0
############################# Socket Server Settings #############################
# The address the socket server listens on. It will get the value returned from
# java.net.InetAddress.getCanonicalHostName() if not configured.
# FORMAT:
# listeners = listener_name://host_name:port
# EXAMPLE:
# listeners = PLAINTEXT://your.host.name:9092
#listeners=PLAINTEXT://:9092
# Hostname and port the broker will advertise to producers and consumers. If not set,
# it uses the value for "listeners" if configured. Otherwise, it will use the value
# returned from java.net.InetAddress.getCanonicalHostName().
advertised.listeners=PLAINTEXT://34.196.151.95:9092
# Maps listener names to security protocols, the default is for them to be the same. See the config documentation for more details
#listener.security.protocol.map=PLAINTEXT:PLAINTEXT,SSL:SSL,SASL_PLAINTEXT:SASL_PLAINTEXT,SASL_SSL:SASL_SSL
# The number of threads that the server uses for receiving requests from the network and sending responses to the network
num.network.threads=3
# The number of threads that the server uses for processing requests, which may include disk I/O
num.io.threads=8
# The send buffer (SO_SNDBUF) used by the socket server
socket.send.buffer.bytes=102400
# The receive buffer (SO_RCVBUF) used by the socket server
socket.receive.buffer.bytes=102400
# The maximum size of a request that the socket server will accept (protection against OOM)
socket.request.max.bytes=104857600
############################# Log Basics #############################
# A comma separated list of directories under which to store log files
log.dirs=/tmp/kafka-logs
# The default number of log partitions per topic. More partitions allow greater
# parallelism for consumption, but this will also result in more files across
# the brokers.
num.partitions=1
# The number of threads per data directory to be used for log recovery at startup and flushing at shutdown.
# This value is recommended to be increased for installations with data dirs located in RAID array.
num.recovery.threads.per.data.dir=1
############################# Internal Topic Settings #############################
# The replication factor for the group metadata internal topics "__consumer_offsets" and "__transaction_state"
# For anything other than development testing, a value greater than 1 is recommended for to ensure availability such as 3.
offsets.topic.replication.factor=1
transaction.state.log.replication.factor=1
transaction.state.log.min.isr=1
############################# Log Flush Policy #############################
# Messages are immediately written to the filesystem but by default we only fsync() to sync
# the OS cache lazily. The following configurations control the flush of data to disk.
# There are a few important trade-offs here:
# 1. Durability: Unflushed data may be lost if you are not using replication.
# 2. Latency: Very large flush intervals may lead to latency spikes when the flush does occur as there will be a lot of data to
flush.
# 3. Throughput: The flush is generally the most expensive operation, and a small flush interval may lead to excessive seeks.
# The settings below allow one to configure the flush policy to flush data after a period of time or
# every N messages (or both). This can be done globally and overridden on a per-topic basis.
# The number of messages to accept before forcing a flush of data to disk
#log.flush.interval.messages=10000
# The maximum amount of time a message can sit in a log before we force a flush
#log.flush.interval.ms=1000
############################# Log Retention Policy #############################
# The following configurations control the disposal of log segments. The policy can
# be set to delete segments after a period of time, or after a given size has accumulated.
# A segment will be deleted whenever *either* of these criteria are met. Deletion always happens
# from the end of the log.
# The minimum age of a log file to be eligible for deletion due to age
log.retention.hours=168
# A size-based retention policy for logs. Segments are pruned from the log unless the remaining
# segments drop below log.retention.bytes. Functions independently of log.retention.hours.
#log.retention.bytes=1073741824
# The maximum size of a log segment file. When this size is reached a new log segment will be created.
log.segment.bytes=1073741824
# The interval at which log segments are checked to see if they can be deleted according
# to the retention policies
log.retention.check.interval.ms=300000
############################# Zookeeper #############################
# Zookeeper connection string (see zookeeper docs for details).
# This is a comma separated host:port pairs, each corresponding to a zk
# server. e.g. "127.0.0.1:3000,127.0.0.1:3001,127.0.0.1:3002".
# You can also append an optional chroot string to the urls to specify the
# root directory for all kafka znodes.
zookeeper.connect=localhost:2181
# Timeout in ms for connecting to zookeeper
zookeeper.connection.timeout.ms=6000
############################# Group Coordinator Settings #############################
# The following configuration specifies the time, in milliseconds, that the GroupCoordinator will delay the initial
consumer rebalance.
# The rebalance will be further delayed by the value of group.initial.rebalance.delay.ms as new members join the group, up to
a maximum of max.poll.interval.ms.
# The default value for this is 3 seconds.
# We override this to 0 here as it makes for a better out-of-the-box experience for development and testing.
# However, in production environments the default value of 3 seconds is more suitable as this will help to avoid unnecessary, and
potentially expensive, rebalances during application startup.
group.initial.rebalance.delay.ms=0
Я могу использовать данные только с последнего сервера конфигурации (3.213.212.236:9092), а не с первого сервера.
Примечание. Я использую данные c# служба окон
Пожалуйста, предложите.