Я использую Ubuntu Mate 18.04
Я считаю, что он использует Lightdm в качестве диспетчера дисплея. У меня есть 2 монитора, подключенных к одному устройству (встроенная графика Intel HD, с 2 портами, одним HDMI, одним VGA).
Из-за особенностей приложений, которые я запускаю, мне нужно иметь 2 отдельных экрана X11 , Мне нужно было бы перемещать мышь между каждым, но кроме этого они должны быть независимыми. Я не должен иметь возможность перемещать windows между мониторами.
Я считаю, что установка с одним дисплеем и 2 экранами, с одним монитором на экран, будет работать.
Использование дисплея менеджер gui приложение Я просто получаю монитор как расширенный, и он находится на том же экране.
Правильно ли я, что один дисплей, с 2 экранами, с одним монитором на экран, будет делать то, что я хочу?
А как бы я его настроил?
Я следую этому руководству:
http://web.archive.org/web/20130429073111/http: //en.gentoo-wiki.com/wiki/ X.Org/Dual_Monitors#Single_graphics_card.2C_Multiple_X_screens_with_ZaphodHeads
также: http://www.odorik.cz/w/linux_multihead https://askubuntu.com/questions/278115/dual-screen-setup-in-ubuntu-with-intel-hd-graphics Xorg: независимый режим
это делает не говоря уже о zaphodheads https://download.nvidia.com/XFree86/Linux-x86_64/304.137/README/configmultxscreens.html
он показывает то, что я хочу, называется ZaphodHeads - несколько экранов с одним устройством
однако результат, который я получаю, составляет 2 пустых экрана только с текстовый курсор в верхнем левом углу
мне кажется, это проблема:
* 10 40 *
Моя конфигурация:
Xrandr
$ xrandr
VGA-1 connected (normal left inverted right x axis y axis) 1920x1080 60.00 + 1600x1200 60.00 1680x1050 59.95 1400x1050 59.98 1600x900 60.00 1280x1024 75.02
60.02 1440x900 59.89 1280x960 60.00 1360x768 59.95 1280x800 74.93 59.81 1152x864 75.00 59.97 1280x720 60.00 1024x768 75.03 60.00 800x600 75.00 60.32 640x480 75.00 59.94
HDMI-1 connected primary 2560x1080+0+0 (normal left inverted right x axis y axis) 673mm x 284mm 2560x1080 60.00*+ 1920x1080
60.00 50.00 59.94 1920x1080i 60.00 50.00 59.94 1680x1050 59.88 1600x900 60.00 1280x1024 75.02
60.02 1152x864 75.00 1280x720 60.00 50.00 59.94 1024x768 75.03 60.00 800x600 75.00 60.32 720x576 50.00 720x480 60.00 59.94 640x480 75.00 60.00 59.94 720x400 70.08 DP-1 disconnected (normal left inverted right x axis y axis)
Устройство PCI:
$ lspci | grep -i vga | cut -d " " -f 1
00:02.0
Xorg.conf
$ cat /etc/X11/xorg.conf
Section "ServerLayout"
Identifier "LayoutDual"
Screen 0 "ScreenR" 0 0
Screen 1 "ScreenE" RightOf "ScreenR" EndSection
Section "ServerFlags"
Option "DefaultServerLayout" "LayoutDual" EndSection
Section "device"
Identifier "IntelR"
Driver "intel"
Option "AccelMethod" "sna"
Screen 0
BusId "PCI:0:2:0"
Option "ZaphodHeads" "HDMI-1"
#Option "NoAccel" "true" EndSection
Section "device"
Identifier "IntelE"
Driver "intel"
Option "AccelMethod" "sna"
Screen 1
BusId "PCI:0:2:0"
Option "ZaphodHeads" "VGA-1"
# Option "NoAccel" "true" EndSection
Section "Monitor"
Identifier "MonitorE"
VendorName "Vendor"
ModelName "Model"
Option "Rotate" "right" EndSection
Section "Monitor"
Identifier "MonitorR"
VendorName "Vendor"
ModelName "Model" EndSection
Section "Screen"
Identifier "ScreenE"
Device "IntelE"
Monitor "MonitorE"
Option "Rotate" "right"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection EndSection
Section "Screen"
Identifier "ScreenR"
Device "IntelR"
Monitor "MonitorR"
DefaultDepth 24
# Option "DPI" "96 x 96"
SubSection "Display"
Depth 24
Modes "2048x2048"
EndSubSection EndSection
Журнал Xorg
$ cat /var/log/Xorg.0.log
[ 44.028] X Protocol Version 11, Revision 0
[ 44.028] Build Operating System: Linux 4.4.0-138-generic x86_64 Ubuntu
[ 44.028] Current Operating System: Linux simu 4.15.0-88-generic #88-Ubuntu SMP Tue Feb 11 20:11:34 UTC 2020 x86_64
[ 44.028] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-88-generic root=UUID=54ac0618-2b10-49ee-bca4-d9ba7634ed46 ro quiet splash vt.handoff=1
[ 44.028] Build Date: 25 October 2018 04:11:27PM
[ 44.028] xorg-server 2:1.19.6-1ubuntu4.2 (For technical support please see http://www.ubuntu.com/support)
[ 44.028] Current version of pixman: 0.34.0
[ 44.028] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 44.028] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 44.028] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 26 19:59:18 2020
[ 44.043] (==) Using config file: "/etc/X11/xorg.conf"
[ 44.043] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 44.091] (**) Option "defaultserverlayout" "LayoutDual"
[ 44.091] (**) ServerLayout "LayoutDual"
[ 44.091] (**) |-->Screen "ScreenR" (0)
[ 44.091] (**) | |-->Monitor "MonitorR"
[ 44.091] (**) | |-->Device "IntelR"
[ 44.091] (**) |-->Screen "ScreenE" (1)
[ 44.091] (**) | |-->Monitor "MonitorE"
[ 44.091] (**) | |-->Device "IntelE"
[ 44.091] (==) Automatically adding devices
[ 44.091] (==) Automatically enabling devices
[ 44.091] (==) Automatically adding GPU devices
[ 44.091] (==) Automatically binding GPU devices
[ 44.091] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 44.103] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 44.103] Entry deleted from font path.
[ 44.103] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 44.103] Entry deleted from font path.
[ 44.103] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 44.103] Entry deleted from font path.
[ 44.103] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 44.103] Entry deleted from font path.
[ 44.103] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 44.103] Entry deleted from font path.
[ 44.103] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 44.103] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 44.103] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 44.103] (II) Loader magic: 0x557171c1d020
[ 44.103] (II) Module ABI versions:
[ 44.103] X.Org ANSI C Emulation: 0.4
[ 44.103] X.Org Video Driver: 23.0
[ 44.103] X.Org XInput driver : 24.1
[ 44.103] X.Org Server Extension : 10.0
[ 44.104] (++) using VT number 7
[ 44.104] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 44.104] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 44.124] (--) PCI:*(0:0:2:0) 8086:0122:8086:2111 rev 9, Mem @ 0xf7800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[ 44.124] (II) LoadModule: "glx"
[ 44.144] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 44.271] (II) Module glx: vendor="X.Org Foundation"
[ 44.271] compiled for 1.19.6, module version = 1.0.0
[ 44.271] ABI class: X.Org Server Extension, version 10.0
[ 44.271] (II) LoadModule: "intel"
[ 44.271] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 44.346] (II) Module intel: vendor="X.Org Foundation"
[ 44.346] compiled for 1.19.5, module version = 2.99.917
[ 44.346] Module class: X.Org Video Driver
[ 44.346] ABI class: X.Org Video Driver, version 23.0
[ 44.346] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 44.346] (II) intel: Driver for Intel(R) HD Graphics
[ 44.346] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 44.346] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 44.368] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20171023
[ 44.368] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917+git20171229-1 (Timo Aaltonen <tjaalton@debian.org>)
[ 44.368] (II) intel(0): SNA compiled for use with valgrind
[ 44.379] (II) intel(1): Using Kernel Mode Setting driver: i915, version 1.6.0 20171023
[ 44.379] (II) intel(1): SNA compiled: xserver-xorg-video-intel 2:2.99.917+git20171229-1 (Timo Aaltonen <tjaalton@debian.org>)
[ 44.379] (II) intel(1): SNA compiled for use with valgrind
[ 44.379] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 3000
[ 44.379] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx; using a maximum of 4 threads
[ 44.379] (**) intel(0): Depth 24, (--) framebuffer bpp 32
[ 44.379] (==) intel(0): RGB weight 888
[ 44.379] (==) intel(0): Default visual is TrueColor
[ 44.379] (**) intel(0): Option "AccelMethod" "sna"
[ 44.379] (**) intel(0): Option "ZaphodHeads" "HDMI-1"
[ 44.380] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 44.380] (II) intel(0): Output VIRTUAL1 using monitor section MonitorR
[ 44.380] (II) intel(0): Enabled output VIRTUAL1
[ 44.380] (II) intel(0): EDID for output VIRTUAL1
[ 44.380] (II) intel(0): Output VIRTUAL1 disconnected
[ 44.380] (WW) intel(0): No outputs definitely connected, trying again...
[ 44.380] (II) intel(0): Output VIRTUAL1 disconnected
[ 44.380] (WW) intel(0): Unable to find connected outputs - setting 1024x768 initial framebuffer
[ 44.380] (==) intel(0): TearFree disabled
[ 44.380] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[ 44.380] (==) intel(0): DPI set to (96, 96)
[ 44.380] (II) Loading sub module "dri3"
[ 44.380] (II) LoadModule: "dri3"
[ 44.380] (II) Module "dri3" already built-in
[ 44.380] (II) Loading sub module "dri2"
[ 44.380] (II) LoadModule: "dri2"
[ 44.380] (II) Module "dri2" already built-in
[ 44.380] (II) Loading sub module "present"
[ 44.380] (II) LoadModule: "present"
[ 44.380] (II) Module "present" already built-in
[ 44.380] (--) intel(1): Integrated Graphics Chipset: Intel(R) HD Graphics 3000
[ 44.380] (--) intel(1): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx; using a maximum of 4 threads
[ 44.380] (**) intel(1): Depth 24, (--) framebuffer bpp 32
[ 44.380] (==) intel(1): RGB weight 888
[ 44.380] (==) intel(1): Default visual is TrueColor
[ 44.380] (**) intel(1): Option "AccelMethod" "sna"
[ 44.380] (**) intel(1): Option "ZaphodHeads" "VGA-1"
[ 44.380] (--) intel(1): Using a maximum size of 256x256 for hardware cursors
[ 44.380] (II) intel(1): Output VIRTUAL1 using monitor section MonitorE
[ 44.381] (**) intel(1): Option "Rotate" "right"
[ 44.381] (II) intel(1): Enabled output VIRTUAL1
[ 44.381] (II) intel(1): EDID for output VIRTUAL1
[ 44.381] (II) intel(1): Output VIRTUAL1 disconnected
[ 44.381] (WW) intel(1): No outputs definitely connected, trying again...
[ 44.381] (II) intel(1): Output VIRTUAL1 disconnected
[ 44.381] (WW) intel(1): Unable to find connected outputs - setting 1024x768 initial framebuffer
[ 44.381] (==) intel(1): TearFree disabled
[ 44.381] (==) intel(1): Using gamma correction (1.0, 1.0, 1.0)
[ 44.381] (==) intel(1): DPI set to (96, 96)
[ 44.381] (II) Loading sub module "dri3"
[ 44.381] (II) LoadModule: "dri3"
[ 44.381] (II) Module "dri3" already built-in
[ 44.381] (II) Loading sub module "dri2"
[ 44.381] (II) LoadModule: "dri2"
[ 44.381] (II) Module "dri2" already built-in
[ 44.381] (II) Loading sub module "present"
[ 44.381] (II) LoadModule: "present"
[ 44.381] (II) Module "present" already built-in
[ 44.381] (==) Depth 24 pixmap format is 32 bpp
[ 44.434] (II) intel(0): SNA initialized with Sandybridge (gen6, gt2) backend
[ 44.434] (==) intel(0): Backing store enabled
[ 44.434] (==) intel(0): Silken mouse enabled
[ 44.434] (II) intel(0): HW Cursor enabled
[ 44.434] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 44.434] (==) intel(0): DPMS enabled
[ 44.434] (==) intel(0): Display hotplug detection enabled
[ 44.434] (II) intel(0): [DRI2] Setup complete
[ 44.434] (II) intel(0): [DRI2] DRI driver: i965
[ 44.434] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 44.434] (II) intel(0): direct rendering: DRI2 enabled
[ 44.434] (II) intel(0): hardware support for Present enabled
[ 44.434] (--) RandR disabled
[ 44.434] (II) intel(1): SNA initialized with Sandybridge (gen6, gt2) backend
[ 44.434] (==) intel(1): Backing store enabled
[ 44.434] (==) intel(1): Silken mouse enabled
[ 44.434] (II) intel(1): HW Cursor enabled
[ 44.434] (II) intel(1): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 44.434] (==) intel(1): DPMS enabled
[ 44.434] (==) intel(1): Display hotplug detection enabled
[ 44.434] (II) intel(1): [DRI2] Setup complete
[ 44.434] (II) intel(1): [DRI2] DRI driver: i965
[ 44.434] (II) intel(1): [DRI2] VDPAU driver: va_gl
[ 44.434] (II) intel(1): direct rendering: DRI2 enabled
[ 44.434] (II) intel(1): hardware support for Present enabled
[ 44.434] (WW) intel(1): Option "Rotate" is not used
[ 44.434] (--) RandR disabled
[ 44.463] (II) SELinux: Disabled on system
[ 44.749] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 44.749] (II) AIGLX: enabled GLX_ARB_create_context
[ 44.749] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 44.749] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[ 44.749] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 44.749] (II) AIGLX: enabled GLX_SGI_swap_control
[ 44.749] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 44.749] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 44.749] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[ 44.749] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 44.749] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 44.749] (II) AIGLX: Loaded and initialized i965
[ 44.749] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 44.757] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 44.757] (II) AIGLX: enabled GLX_ARB_create_context
[ 44.757] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 44.757] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[ 44.757] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 44.757] (II) AIGLX: enabled GLX_SGI_swap_control
[ 44.757] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 44.757] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 44.757] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[ 44.757] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 44.757] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 44.757] (II) AIGLX: Loaded and initialized i965
[ 44.757] (II) GLX: Initialized DRI2 GL provider for screen 1
[ 45.054] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 45.054] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 45.054] (II) LoadModule: "libinput"
[ 45.054] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 45.095] (II) Module libinput: vendor="X.Org Foundation"
[ 45.095] compiled for 1.19.6, module version = 0.27.1
[ 45.095] Module class: X.Org XInput Driver
[ 45.095] ABI class: X.Org XInput driver, version 24.1
[ 45.095] (II) Using input driver 'libinput' for 'Power Button'
[ 45.095] (**) Power Button: always reports core events
[ 45.095] (**) Option "Device" "/dev/input/event1"
[ 45.095] (**) Option "_source" "server/udev"
[ 45.095] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 45.095] (II) event1 - Power Button: device is a keyboard
[ 45.095] (II) event1 - Power Button: device removed
[ 45.108] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 45.108] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 45.108] (**) Option "xkb_model" "pc105"
[ 45.108] (**) Option "xkb_layout" "us"
[ 45.108] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 45.108] (II) event1 - Power Button: device is a keyboard
[ 45.109] (II) config/udev: Adding input device Video Bus (/dev/input/event2)
[ 45.109] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 45.109] (II) Using input driver 'libinput' for 'Video Bus'
[ 45.109] (**) Video Bus: always reports core events
[ 45.109] (**) Option "Device" "/dev/input/event2"
[ 45.109] (**) Option "_source" "server/udev"
[ 45.109] (II) event2 - Video Bus: is tagged by udev as: Keyboard
[ 45.109] (II) event2 - Video Bus: device is a keyboard
[ 45.109] (II) event2 - Video Bus: device removed
[ 45.124] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2/event2"
[ 45.124] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 45.124] (**) Option "xkb_model" "pc105"
[ 45.124] (**) Option "xkb_layout" "us"
[ 45.124] (II) event2 - Video Bus: is tagged by udev as: Keyboard
[ 45.124] (II) event2 - Video Bus: device is a keyboard
[ 45.125] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 45.125] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 45.125] (II) Using input driver 'libinput' for 'Power Button'
[ 45.125] (**) Power Button: always reports core events
[ 45.125] (**) Option "Device" "/dev/input/event0"
[ 45.125] (**) Option "_source" "server/udev"
[ 45.126] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 45.126] (II) event0 - Power Button: device is a keyboard
[ 45.126] (II) event0 - Power Button: device removed
[ 45.140] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 45.140] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 45.140] (**) Option "xkb_model" "pc105"
[ 45.140] (**) Option "xkb_layout" "us"
[ 45.141] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 45.141] (II) event0 - Power Button: device is a keyboard
[ 45.142] (II) config/udev: Adding input device UC02 UC02 (/dev/input/event3)
[ 45.142] (**) UC02 UC02: Applying InputClass "libinput keyboard catchall"
[ 45.142] (II) Using input driver 'libinput' for 'UC02 UC02'
[ 45.142] (**) UC02 UC02: always reports core events
[ 45.142] (**) Option "Device" "/dev/input/event3"
[ 45.142] (**) Option "_source" "server/udev"
[ 45.143] (II) event3 - UC02 UC02: is tagged by udev as: Keyboard
[ 45.143] (II) event3 - UC02 UC02: device is a keyboard
[ 45.143] (II) event3 - UC02 UC02: device removed
[ 45.156] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.3/0003:0000:0000.0001/input/input3/event3"
[ 45.156] (II) XINPUT: Adding extended input device "UC02 UC02" (type: KEYBOARD, id 9)
[ 45.156] (**) Option "xkb_model" "pc105"
[ 45.156] (**) Option "xkb_layout" "us"
[ 45.157] (II) event3 - UC02 UC02: is tagged by udev as: Keyboard
[ 45.157] (II) event3 - UC02 UC02: device is a keyboard
[ 45.157] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event10)
[ 45.157] (II) No input driver specified, ignoring this device.
[ 45.157] (II) This device may have been added with another device file.
[ 45.158] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event11)
[ 45.158] (II) No input driver specified, ignoring this device.
[ 45.158] (II) This device may have been added with another device file.
[ 45.158] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event6)
[ 45.158] (II) No input driver specified, ignoring this device.
[ 45.158] (II) This device may have been added with another device file.
[ 45.159] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event7)
[ 45.159] (II) No input driver specified, ignoring this device.
[ 45.159] (II) This device may have been added with another device file.
[ 45.159] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event8)
[ 45.160] (II) No input driver specified, ignoring this device.
[ 45.160] (II) This device may have been added with another device file.
[ 45.160] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event9)
[ 45.160] (II) No input driver specified, ignoring this device.
[ 45.160] (II) This device may have been added with another device file.
[ 45.161] (II) config/udev: Adding input device Telink Wireless Receiver (/dev/input/event4)
[ 45.161] (**) Telink Wireless Receiver: Applying InputClass "libinput pointer catchall"
[ 45.161] (**) Telink Wireless Receiver: Applying InputClass "libinput keyboard catchall"
[ 45.161] (II) Using input driver 'libinput' for 'Telink Wireless Receiver'
[ 45.161] (**) Telink Wireless Receiver: always reports core events
[ 45.161] (**) Option "Device" "/dev/input/event4"
[ 45.161] (**) Option "_source" "server/udev"
[ 45.162] (II) event4 - Telink Wireless Receiver: is tagged by udev as: Keyboard Mouse
[ 45.162] (II) event4 - Telink Wireless Receiver: device is a pointer
[ 45.162] (II) event4 - Telink Wireless Receiver: device is a keyboard
[ 45.162] (II) event4 - Telink Wireless Receiver: device removed
[ 45.180] (II) libinput: Telink Wireless Receiver: needs a virtual subdevice
[ 45.180] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/0003:248A:8367.0002/input/input4/event4"
[ 45.180] (II) XINPUT: Adding extended input device "Telink Wireless Receiver" (type: MOUSE, id 10)
[ 45.180] (**) Option "AccelerationScheme" "none"
[ 45.180] (**) Telink Wireless Receiver: (accel) selected scheme none/0
[ 45.180] (**) Telink Wireless Receiver: (accel) acceleration factor: 2.000
[ 45.180] (**) Telink Wireless Receiver: (accel) acceleration threshold: 4
[ 45.181] (II) event4 - Telink Wireless Receiver: is tagged by udev as: Keyboard Mouse
[ 45.181] (II) event4 - Telink Wireless Receiver: device is a pointer
[ 45.181] (II) event4 - Telink Wireless Receiver: device is a keyboard
[ 45.182] (II) config/udev: Adding input device Telink Wireless Receiver (/dev/input/mouse0)
[ 45.182] (II) No input driver specified, ignoring this device.
[ 45.182] (II) This device may have been added with another device file.
[ 45.183] (II) config/udev: Adding input device Telink Wireless Receiver (/dev/input/event5)
[ 45.183] (**) Telink Wireless Receiver: Applying InputClass "libinput keyboard catchall"
[ 45.183] (II) Using input driver 'libinput' for 'Telink Wireless Receiver'
[ 45.183] (**) Telink Wireless Receiver: always reports core events
[ 45.183] (**) Option "Device" "/dev/input/event5"
[ 45.183] (**) Option "_source" "server/udev"
[ 45.184] (II) event5 - Telink Wireless Receiver: is tagged by udev as: Keyboard
[ 45.184] (II) event5 - Telink Wireless Receiver: device is a keyboard
[ 45.184] (II) event5 - Telink Wireless Receiver: device removed
[ 45.204] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.1/0003:248A:8367.0003/input/input5/event5"
[ 45.204] (II) XINPUT: Adding extended input device "Telink Wireless Receiver" (type: KEYBOARD, id 11)
[ 45.204] (**) Option "xkb_model" "pc105"
[ 45.204] (**) Option "xkb_layout" "us"
[ 45.205] (II) event5 - Telink Wireless Receiver: is tagged by udev as: Keyboard
[ 45.205] (II) event5 - Telink Wireless Receiver: device is a keyboard
[ 45.213] (**) Telink Wireless Receiver: Applying InputClass "libinput pointer catchall"
[ 45.213] (**) Telink Wireless Receiver: Applying InputClass "libinput keyboard catchall"
[ 45.213] (II) Using input driver 'libinput' for 'Telink Wireless Receiver'
[ 45.213] (**) Telink Wireless Receiver: always reports core events
[ 45.213] (**) Option "Device" "/dev/input/event4"
[ 45.213] (**) Option "_source" "_driver/libinput"
[ 45.213] (II) libinput: Telink Wireless Receiver: is a virtual subdevice
[ 45.213] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/0003:248A:8367.0002/input/input4/event4"
[ 45.213] (II) XINPUT: Adding extended input device "Telink Wireless Receiver" (type: KEYBOARD, id 12)
[ 45.213] (**) Option "xkb_model" "pc105"
[ 45.213] (**) Option "xkb_layout" "us"
2 экрана черные с курсором в верхнем левом углу
Нужно ли мне настроить lightdm для принятия этого?
Спасибо