Команда оболочки pip install cartopy привела к нескольким ошибкам.
Сначала произошла следующая ошибка:
ERROR: Command errored out with exit status 1:
command: /home/linuxbrew/.linuxbrew/opt/python@3.8/bin/python3.8 -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-j47_isf2/cartopy/setup.py'"'"'; __file__='"'"'/tmp/pip-install-j47_isf2/cartopy/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' egg_info --egg-base /tmp/pip-pip-egg-info-a9f6gipd
cwd: /tmp/pip-install-j47_isf2/cartopy/
Complete output (3 lines):
/tmp/pip-install-j47_isf2/cartopy/setup.py:157: UserWarning: Unable to determine Proj version. Ensure you have 4.9.0 or later installed, or installation may fail.
warnings.warn(
Proj version 0.0.0 is installed, but cartopy requires at least version 4.9.0.
----------------------------------------
ERROR: Command errored out with exit status 1: python setup.py egg_info Check the logs for full command output.
После переустановки proj4 и игры с передачей переменных среды в my .bashrc -file, например
export PROJ_LIB=/home/linuxbrew/.linuxbrew/bin/proj
export PROJ=/home/linuxbrew/.linuxbrew/bin/proj
сообщение об ошибке изменено на следующее:
andylu@andylu-ThinkPad-Edge-E130:~/$ pip install cartopy
Collecting cartopy
Using cached Cartopy-0.18.0.tar.gz (14.4 MB)
Requirement already satisfied: numpy>=1.10 in /home/linuxbrew/.linuxbrew/lib/python3.8/site-packages (from cartopy) (1.19.1)
Requirement already satisfied: shapely>=1.5.6 in /home/linuxbrew/.linuxbrew/lib/python3.8/site-packages (from cartopy) (1.7.0)
Requirement already satisfied: pyshp>=1.1.4 in /home/linuxbrew/.linuxbrew/lib/python3.8/site-packages (from cartopy) (2.1.0)
Requirement already satisfied: six>=1.3.0 in /home/linuxbrew/.linuxbrew/lib/python3.8/site-packages (from cartopy) (1.15.0)
Requirement already satisfied: setuptools>=0.7.2 in /home/linuxbrew/.linuxbrew/lib/python3.8/site-packages (from cartopy) (49.2.1)
Building wheels for collected packages: cartopy
Building wheel for cartopy (setup.py) ... error
ERROR: Command errored out with exit status 1:
command: /home/linuxbrew/.linuxbrew/opt/python@3.8/bin/python3.8 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-81mh5l39/cartopy/setup.py'"'"'; __file__='"'"'/tmp/pip-install-81mh5l39/cartopy/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' bdist_wheel -d /tmp/pip-wheel-v0pstk7_
cwd: /tmp/pip-install-81mh5l39/cartopy/
Complete output (272 lines):
running bdist_wheel
running build
running build_py
creating build
creating build/lib.linux-x86_64-3.8
creating build/lib.linux-x86_64-3.8/cartopy
...
I/home/linuxbrew/.linuxbrew/opt/python@3.8/include/python3.8 -c lib/cartopy/trace.cpp -o build/temp.linux-x86_64-3.8/lib/cartopy/trace.o
lib/cartopy/trace.cpp: In function 'void __pyx_f_7cartopy_5trace__project_segment(GEOSContextHandle_t, const GEOSCoordSequence*, unsigned int, unsigned int, __pyx_obj_7cartopy_5trace_Interpolator*, const GEOSPreparedGeometry*, double, __pyx_obj_7cartopy_5trace_LineAccumulator*)':
lib/cartopy/trace.cpp:6362:52: warning: '__pyx_v_t_max' may be used uninitialized in this function [-Wmaybe-uninitialized]
__pyx_t_2 = PyFloat_FromDouble(__pyx_v_t_max); if (unlikely(!__pyx_t_2)) __PYX_ERR(0, 539, __pyx_L1_error)
^
lib/cartopy/trace.cpp:6360:52: warning: '__pyx_v_t_min' may be used uninitialized in this function [-Wmaybe-uninitialized]
__pyx_t_3 = PyFloat_FromDouble(__pyx_v_t_min); if (unlikely(!__pyx_t_3)) __PYX_ERR(0, 539, __pyx_L1_error)
^
c++ -pthread -shared -L/home/linuxbrew/.linuxbrew/lib build/temp.linux-x86_64-3.8/lib/cartopy/trace.o -L/home/linuxbrew/.linuxbrew/opt/python@3.8/lib -L/home/linuxbrew/.linuxbrew/Cellar/proj/7.1.0/lib -L/home/linuxbrew/.linuxbrew/Cellar/geos/3.8.1_1/lib -L/home/linuxbrew/.linuxbrew/lib -L/home/linuxbrew/.linuxbrew/opt/openssl@1.1/lib -L/home/linuxbrew/.linuxbrew/opt/sqlite/lib -L/home/linuxbrew/.linuxbrew/opt/python@3.8/lib -R/home/linuxbrew/.linuxbrew/opt/python@3.8/lib -lproj -lgeos_c -o build/lib.linux-x86_64-3.8/cartopy/trace.cpython-38-x86_64-linux-gnu.so
c++: error: unrecognized command line option '-R'
error: command 'c++' failed with exit status 1
----------------------------------------
ERROR: Failed building wheel for cartopy
Running setup.py clean for cartopy
Failed to build cartopy
DEPRECATION: Could not build wheels for cartopy which do not use PEP 517. pip will fall back to legacy 'setup.py install' for these. pip 21.0 will remove support for this functionality. A possible replacement is to fix the wheel build issue reported above. You can find discussion regarding this at https://github.com/pypa/pip/issues/8368.
Installing collected packages: cartopy
Running setup.py install for cartopy ... error
ERROR: Command errored out with exit status 1:
command: /home/linuxbrew/.linuxbrew/opt/python@3.8/bin/python3.8 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-81mh5l39/cartopy/setup.py'"'"'; __file__='"'"'/tmp/pip-install-81mh5l39/cartopy/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' install --record /tmp/pip-record-lmvk94_o/install-record.txt --single-version-externally-managed --compile --install-headers /home/linuxbrew/.linuxbrew/include/python3.8/cartopy
cwd: /tmp/pip-install-81mh5l39/cartopy/
Complete output (272 lines):
running install
running build
...
building 'cartopy.trace' extension
creating build/temp.linux-x86_64-3.8
creating build/temp.linux-x86_64-3.8/lib
creating build/temp.linux-x86_64-3.8/lib/cartopy
cc -pthread -Wno-unused-result -Wsign-compare -DNDEBUG -g -O3 -Wall -fPIC -DACCEPT_USE_OF_DEPRECATED_PROJ_API_H=1 -I/home/linuxbrew/.linuxbrew/opt/python@3.8/include -I./lib/cartopy -I/home/linuxbrew/.linuxbrew/lib/python3.8/site-packages/numpy/core/include -I/home/linuxbrew/.linuxbrew/Cellar/proj/7.1.0/include -I/home/linuxbrew/.linuxbrew/Cellar/geos/3.8.1_1/include -I/home/linuxbrew/.linuxbrew/include -I/home/linuxbrew/.linuxbrew/opt/openssl@1.1/include -I/home/linuxbrew/.linuxbrew/opt/sqlite/include -I/home/linuxbrew/.linuxbrew/opt/python@3.8/include/python3.8 -c lib/cartopy/trace.cpp -o build/temp.linux-x86_64-3.8/lib/cartopy/trace.o
lib/cartopy/trace.cpp: In function 'void __pyx_f_7cartopy_5trace__project_segment(GEOSContextHandle_t, const GEOSCoordSequence*, unsigned int, unsigned int, __pyx_obj_7cartopy_5trace_Interpolator*, const GEOSPreparedGeometry*, double, __pyx_obj_7cartopy_5trace_LineAccumulator*)':
lib/cartopy/trace.cpp:6362:52: warning: '__pyx_v_t_max' may be used uninitialized in this function [-Wmaybe-uninitialized]
__pyx_t_2 = PyFloat_FromDouble(__pyx_v_t_max); if (unlikely(!__pyx_t_2)) __PYX_ERR(0, 539, __pyx_L1_error)
^
lib/cartopy/trace.cpp:6360:52: warning: '__pyx_v_t_min' may be used uninitialized in this function [-Wmaybe-uninitialized]
__pyx_t_3 = PyFloat_FromDouble(__pyx_v_t_min); if (unlikely(!__pyx_t_3)) __PYX_ERR(0, 539, __pyx_L1_error)
^
c++ -pthread -shared -L/home/linuxbrew/.linuxbrew/lib build/temp.linux-x86_64-3.8/lib/cartopy/trace.o -L/home/linuxbrew/.linuxbrew/opt/python@3.8/lib -L/home/linuxbrew/.linuxbrew/Cellar/proj/7.1.0/lib -L/home/linuxbrew/.linuxbrew/Cellar/geos/3.8.1_1/lib -L/home/linuxbrew/.linuxbrew/lib -L/home/linuxbrew/.linuxbrew/opt/openssl@1.1/lib -L/home/linuxbrew/.linuxbrew/opt/sqlite/lib -L/home/linuxbrew/.linuxbrew/opt/python@3.8/lib -R/home/linuxbrew/.linuxbrew/opt/python@3.8/lib -lproj -lgeos_c -o build/lib.linux-x86_64-3.8/cartopy/trace.cpython-38-x86_64-linux-gnu.so
c++: error: unrecognized command line option '-R'
error: command 'c++' failed with exit status 1
----------------------------------------
ERROR: Command errored out with exit status 1: /home/linuxbrew/.linuxbrew/opt/python@3.8/bin/python3.8 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-81mh5l39/cartopy/setup.py'"'"'; __file__='"'"'/tmp/pip-install-81mh5l39/cartopy/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' install --record /tmp/pip-record-lmvk94_o/install-record.txt --single-version-externally-managed --compile --install-headers /home/linuxbrew/.linuxbrew/include/python3.8/cartopy Check the logs for full command output.
Полное определение среды
Операционная система
Lubuntu 18.04 64 бит
Версия Cartopy
Collecting cartopy
Using cached Cartopy-0.18.0.tar.gz (14.4 MB)
список пунктов
Package Version
----------------------------- ------------
affine 2.3.0
aiohttp 3.6.2
alabaster 0.7.12
argon2-cffi 20.1.0
arrow 0.15.8
asgiref 3.2.10
astroid 2.4.2
async-timeout 3.0.1
attrs 19.3.0
Babel 2.8.0
backcall 0.2.0
beautifulsoup4 4.9.1
bleach 3.1.5
bokeh 2.1.1
Bottleneck 1.3.2
branca 0.4.1
bs4 0.0.1
cachetools 4.1.1
cdsapi 0.3.0
certifi 2020.6.20
cffi 1.14.1
cftime 1.2.1
chardet 3.0.4
click 7.1.2
click-plugins 1.1.1
cligj 0.5.0
cloudpickle 1.5.0
colorama 0.4.3
coverage 5.2.1
cycler 0.10.0
Cython 0.29.21
dask 2.22.0
decorator 4.4.2
defusedxml 0.6.0
descartes 1.1.0
distributed 2.22.0
Django 3.0.9
docutils 0.16
entrypoints 0.3
et-xmlfile 1.0.1
filelock 3.0.12
Fiona 1.8.13.post1
flake8 3.8.3
Flask 1.1.2
folium 0.11.0
fsspec 0.8.0
geojson 2.5.0
geojsoncontour 0.4.0
geopandas 0.8.1
geos 0.2.2
gevent 20.6.2
google 3.0.0
google-api-core 1.22.0
google-auth 1.20.0
google-auth-oauthlib 0.4.1
google-cloud-bigquery 1.26.1
google-cloud-core 1.3.0
google-crc32c 0.1.0
google-resumable-media 0.7.0
googleapis-common-protos 1.52.0
greenlet 0.4.16
grpcio 1.30.0
h5py 2.10.0
HeapDict 1.0.1
html5lib 1.1
hypothesis 5.23.9
idna 2.10
imagesize 1.2.0
imgkit 1.0.2
importlib-metadata 1.7.0
iniconfig 1.0.1
ipykernel 5.3.4
ipython 7.17.0
ipython-genutils 0.2.0
ipywidgets 7.5.1
isort 5.2.2
itsdangerous 1.1.0
jdcal 1.4.1
jedi 0.17.2
Jinja2 2.11.2
joblib 0.16.0
jsonschema 3.2.0
jupyter 1.0.0
jupyter-client 6.1.6
jupyter-console 6.1.0
jupyter-core 4.6.3
kiwisolver 1.2.0
lazy-object-proxy 1.5.1
locket 0.2.0
lxml 4.5.2
MarkupSafe 1.1.1
matplotlib 3.3.0
mccabe 0.6.1
mistune 0.8.4
modin 0.8.0
more-itertools 8.4.0
mpmath 1.1.0
msgpack 1.0.0
multidict 4.7.6
munch 2.5.0
nbconvert 5.6.1
nbformat 5.0.7
netCDF4 1.5.4
networkx 2.4
notebook 6.1.0
numexpr 2.7.1
numpy 1.19.1
oauthlib 3.1.0
openpyxl 3.0.4
osmnx 0.15.1
OWSLib 0.20.0
packaging 20.4
pandas 1.1.0
pandas-datareader 0.9.0
pandas-gbq 0.13.2
pandocfilters 1.4.2
parso 0.7.1
partd 1.1.0
patsy 0.5.1
pdfkit 0.6.1
pep8 1.7.1
pexpect 4.8.0
pickle5 0.0.11
pickleshare 0.7.5
Pillow 7.2.0
pip 20.2
planar 0.4
plotly 4.9.0
pluggy 0.13.1
proj 0.2.0
prometheus-client 0.8.0
prompt-toolkit 3.0.5
protobuf 3.12.4
psutil 5.7.2
ptyprocess 0.6.0
py 1.9.0
py-spy 0.3.3
pyarrow 0.16.0
pyasn1 0.4.8
pyasn1-modules 0.2.8
pycodestyle 2.6.0
pycparser 2.20
pydata-google-auth 1.1.0
pyepsg 0.4.0
pyflakes 2.2.0
Pygments 2.6.1
pyhdf 0.10.2
pykdtree 1.3.1
pylint 2.5.3
pylint-django 2.2.0
pylint-plugin-utils 0.6
pyparsing 2.4.7
pyproj 2.6.1.post1
PyQt5 5.15.0
PyQt5-sip 12.8.0
pyrsistent 0.16.0
pyshp 2.1.0
PySide2 5.15.0
pytest 6.0.1
pytest-cov 2.10.0
pytest-filter-subpackage 0.1.1
python-dateutil 2.8.1
pytz 2020.1
PyYAML 5.3.1
pyzmq 19.0.2
qtconsole 4.7.5
QtPy 1.9.0
rasterio 1.1.5
ray 0.8.6
redis 3.4.1
regex 2020.7.14
requests 2.24.0
requests-oauthlib 1.3.0
retrying 1.3.3
rsa 4.6
Rtree 0.9.4
salem 0.2.4
scikit-learn 0.23.1
scipy 1.5.2
seaborn 0.10.1
Send2Trash 1.5.0
setuptools 49.2.1
Shapely 1.7.0
shiboken2 5.15.0
six 1.15.0
sklearn 0.0
snowballstemmer 2.0.0
snuggs 1.4.7
sortedcollections 1.2.1
sortedcontainers 2.2.2
soupsieve 2.0.1
Sphinx 3.1.2
sphinxcontrib-applehelp 1.0.2
sphinxcontrib-devhelp 1.0.2
sphinxcontrib-htmlhelp 1.0.3
sphinxcontrib-jsmath 1.0.1
sphinxcontrib-qthelp 1.0.3
sphinxcontrib-serializinghtml 1.1.4
SQLAlchemy 1.3.18
sqlparse 0.3.1
statsmodels 0.11.1
swifter 1.0.2
sympy 1.6.1
tables 3.6.1
tblib 1.7.0
terminado 0.8.3
testpath 0.4.4
threadpoolctl 2.1.0
toml 0.10.1
toolz 0.10.0
tornado 6.0.4
tqdm 4.48.1
traitlets 4.3.3
typed-ast 1.4.1
typing-extensions 3.7.4.2
urllib3 1.25.10
wcwidth 0.2.5
webcolors 1.11.1
webencodings 0.5.1
Werkzeug 1.0.1
wheel 0.34.2
widgetsnbextension 3.5.1
windrose 1.6.7
wrapt 1.12.1
xarray 0.16.0
xlrd 1.2.0
XlsxWriter 1.3.1
yapf 0.30.0
yarl 1.5.1
zict 2.0.0
zipp 3.1.0
zope.event 4.4
zope.interface 5.1.0