Как подключиться от USB-порта к консольному устройству RJ45? - PullRequest
Новая
       41

Как подключиться от USB-порта к консольному устройству RJ45?

0 голосов
/ 23 июня 2011

В моем ноутбуке с Linux порт USB подключен к внешнему маршрутизатору с консольным портом (RJ45, Juniper SRX210). Это кабель, который я использую:

enter image description here

Я использовал cuteCom enter image description here И я использовал миником enter image description here

Для подключения используется 9600, но он не распознает / dev / ttyS0. Также протестировано с USBViewer (http://www.kroah.com/linux-usb/), которое выдает ошибку «не удается открыть файл / proc / bus / usb / devices»

Как я могу сделать это соединение успешным? Вот мой lsusb и lsusb -v 

[root@example html]# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 046d:c05d Logitech, Inc. 


[root@example html]# lsusb -v

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
  bLength 18
  bDescriptorType 1
  bcdUSB 2.00
  bDeviceClass 9 Hub
  bDeviceSubClass 0 Unused
  bDeviceProtocol 0 Full speed (or root) hub
  bMaxPacketSize0 64
  idVendor 0x1d6b Linux Foundation
  idProduct 0x0002 2.0 root hub
  bcdDevice 2.06
  iManufacturer 3 Linux 2.6.38.8-32.fc15.i686 ehci_hcd
  iProduct 2 EHCI Host Controller
  iSerial 1 0000:00:1d.7
  bNumConfigurations 1
  Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 25
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0xe0
      Self Powered
      Remote Wakeup
    MaxPower 0mA
    Interface Descriptor:
      bLength 9
      bDescriptorType 4
      bInterfaceNumber 0
      bAlternateSetting 0
      bNumEndpoints 1
      bInterfaceClass 9 Hub
      bInterfaceSubClass 0 Unused
      bInterfaceProtocol 0 Full speed (or root) hub
      iInterface 0
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x81 EP 1 IN
        bmAttributes 3
          Transfer Type Interrupt
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0004 1x 4 bytes
        bInterval 12
Hub Descriptor:
  bLength 11
  bDescriptorType 41
  nNbrPorts 8
  wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
  bPwrOn2PwrGood 10 * 2 milli seconds
  bHubContrCurrent 0 milli Ampere
  DeviceRemovable 0x00 0x00
  PortPwrCtrlMask 0xff 0xff
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power
   Port 3: 0000.0100 power
   Port 4: 0000.0100 power
   Port 5: 0000.0100 power
   Port 6: 0000.0100 power
   Port 7: 0000.0100 power
   Port 8: 0000.0100 power
Device Status: 0x0003
  Self Powered
  Remote Wakeup Enabled

Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
  bLength 18
  bDescriptorType 1
  bcdUSB 1.10
  bDeviceClass 9 Hub
  bDeviceSubClass 0 Unused
  bDeviceProtocol 0 Full speed (or root) hub
  bMaxPacketSize0 64
  idVendor 0x1d6b Linux Foundation
  idProduct 0x0001 1.1 root hub
  bcdDevice 2.06
  iManufacturer 3 Linux 2.6.38.8-32.fc15.i686 uhci_hcd
  iProduct 2 UHCI Host Controller
  iSerial 1 0000:00:1d.0
  bNumConfigurations 1
  Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 25
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0xe0
      Self Powered
      Remote Wakeup
    MaxPower 0mA
    Interface Descriptor:
      bLength 9
      bDescriptorType 4
      bInterfaceNumber 0
      bAlternateSetting 0
      bNumEndpoints 1
      bInterfaceClass 9 Hub
      bInterfaceSubClass 0 Unused
      bInterfaceProtocol 0 Full speed (or root) hub
      iInterface 0
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x81 EP 1 IN
        bmAttributes 3
          Transfer Type Interrupt
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0002 1x 2 bytes
        bInterval 255
Hub Descriptor:
  bLength 9
  bDescriptorType 41
  nNbrPorts 2
  wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
  bPwrOn2PwrGood 1 * 2 milli seconds
  bHubContrCurrent 0 milli Ampere
  DeviceRemovable 0x00
  PortPwrCtrlMask 0xff
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power
Device Status: 0x0003
  Self Powered
  Remote Wakeup Enabled

Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
  bLength 18
  bDescriptorType 1
  bcdUSB 1.10
  bDeviceClass 9 Hub
  bDeviceSubClass 0 Unused
  bDeviceProtocol 0 Full speed (or root) hub
  bMaxPacketSize0 64
  idVendor 0x1d6b Linux Foundation
  idProduct 0x0001 1.1 root hub
  bcdDevice 2.06
  iManufacturer 3 Linux 2.6.38.8-32.fc15.i686 uhci_hcd
  iProduct 2 UHCI Host Controller
  iSerial 1 0000:00:1d.1
  bNumConfigurations 1
  Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 25
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0xe0
      Self Powered
      Remote Wakeup
    MaxPower 0mA
    Interface Descriptor:
      bLength 9
      bDescriptorType 4
      bInterfaceNumber 0
      bAlternateSetting 0
      bNumEndpoints 1
      bInterfaceClass 9 Hub
      bInterfaceSubClass 0 Unused
      bInterfaceProtocol 0 Full speed (or root) hub
      iInterface 0
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x81 EP 1 IN
        bmAttributes 3
          Transfer Type Interrupt
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0002 1x 2 bytes
        bInterval 255
Hub Descriptor:
  bLength 9
  bDescriptorType 41
  nNbrPorts 2
  wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
  bPwrOn2PwrGood 1 * 2 milli seconds
  bHubContrCurrent 0 milli Ampere
  DeviceRemovable 0x00
  PortPwrCtrlMask 0xff
 Hub Port Status:
   Port 1: 0000.0303 lowspeed power enable connect
   Port 2: 0000.0100 power
Device Status: 0x0003
  Self Powered
  Remote Wakeup Enabled

Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
  bLength 18
  bDescriptorType 1
  bcdUSB 1.10
  bDeviceClass 9 Hub
  bDeviceSubClass 0 Unused
  bDeviceProtocol 0 Full speed (or root) hub
  bMaxPacketSize0 64
  idVendor 0x1d6b Linux Foundation
  idProduct 0x0001 1.1 root hub
  bcdDevice 2.06
  iManufacturer 3 Linux 2.6.38.8-32.fc15.i686 uhci_hcd
  iProduct 2 UHCI Host Controller
  iSerial 1 0000:00:1d.2
  bNumConfigurations 1
  Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 25
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0xe0
      Self Powered
      Remote Wakeup
    MaxPower 0mA
    Interface Descriptor:
      bLength 9
      bDescriptorType 4
      bInterfaceNumber 0
      bAlternateSetting 0
      bNumEndpoints 1
      bInterfaceClass 9 Hub
      bInterfaceSubClass 0 Unused
      bInterfaceProtocol 0 Full speed (or root) hub
      iInterface 0
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x81 EP 1 IN
        bmAttributes 3
          Transfer Type Interrupt
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0002 1x 2 bytes
        bInterval 255
Hub Descriptor:
  bLength 9
  bDescriptorType 41
  nNbrPorts 2
  wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
  bPwrOn2PwrGood 1 * 2 milli seconds
  bHubContrCurrent 0 milli Ampere
  DeviceRemovable 0x00
  PortPwrCtrlMask 0xff
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power
Device Status: 0x0003
  Self Powered
  Remote Wakeup Enabled

Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
  bLength 18
  bDescriptorType 1
  bcdUSB 1.10
  bDeviceClass 9 Hub
  bDeviceSubClass 0 Unused
  bDeviceProtocol 0 Full speed (or root) hub
  bMaxPacketSize0 64
  idVendor 0x1d6b Linux Foundation
  idProduct 0x0001 1.1 root hub
  bcdDevice 2.06
  iManufacturer 3 Linux 2.6.38.8-32.fc15.i686 uhci_hcd
  iProduct 2 UHCI Host Controller
  iSerial 1 0000:00:1d.3
  bNumConfigurations 1
  Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 25
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0xe0
      Self Powered
      Remote Wakeup
    MaxPower 0mA
    Interface Descriptor:
      bLength 9
      bDescriptorType 4
      bInterfaceNumber 0
      bAlternateSetting 0
      bNumEndpoints 1
      bInterfaceClass 9 Hub
      bInterfaceSubClass 0 Unused
      bInterfaceProtocol 0 Full speed (or root) hub
      iInterface 0
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x81 EP 1 IN
        bmAttributes 3
          Transfer Type Interrupt
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0002 1x 2 bytes
        bInterval 255
Hub Descriptor:
  bLength 9
  bDescriptorType 41
  nNbrPorts 2
  wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
  bPwrOn2PwrGood 1 * 2 milli seconds
  bHubContrCurrent 0 milli Ampere
  DeviceRemovable 0x00
  PortPwrCtrlMask 0xff
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power
Device Status: 0x0003
  Self Powered
  Remote Wakeup Enabled

Bus 003 Device 002: ID 046d:c05d Logitech, Inc.
Device Descriptor:
  bLength 18
  bDescriptorType 1
  bcdUSB 2.00
  bDeviceClass 0 (Defined at Interface level)
  bDeviceSubClass 0
  bDeviceProtocol 0
  bMaxPacketSize0 8
  idVendor 0x046d Logitech, Inc.
  idProduct 0xc05d
  bcdDevice 53.00
  iManufacturer 1 Logitech
  iProduct 2 USB Optical Mouse
  iSerial 0
  bNumConfigurations 1
  Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 34
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0xa0
      (Bus Powered)
      Remote Wakeup
    MaxPower 98mA
    Interface Descriptor:
      bLength 9
      bDescriptorType 4
      bInterfaceNumber 0
      bAlternateSetting 0
      bNumEndpoints 1
      bInterfaceClass 3 Human Interface Device
      bInterfaceSubClass 1 Boot Interface Subclass
      bInterfaceProtocol 2 Mouse
      iInterface 0
        HID Device Descriptor:
          bLength 9
          bDescriptorType 33
          bcdHID 1.11
          bCountryCode 0 Not supported
          bNumDescriptors 1
          bDescriptorType 34 Report
          wDescriptorLength 52
         Report Descriptors:
           ** UNAVAILABLE **
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x81 EP 1 IN
        bmAttributes 3
          Transfer Type Interrupt
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0005 1x 5 bytes
        bInterval 10
Device Status: 0x0000
  (Bus Powered)

Ответы [ 2 ]

2 голосов
/ 23 июня 2011

ttyS0 - это первый порт вашей системы RS232, вы, вероятно, ищете ttyUSB0

0 голосов
/ 04 февраля 2017

неправильный кабель.этот кабель для сканеров.Преобразование сигналов USB в последовательные сигналы выполняется с помощью схемы UART, встроенной в разъем.См. FTDI USB-RS232 Последовательный к RJ45 CAT5 Консольный адаптер Кабель для маршрутизаторов Cisco на ebay.Тогда используйте программу Linux Minicom.

...