Могу ли я узнать, как использовать этот пакет nuget "IS_nRF24l01p". Я выяснил команду и переменную, которые должны быть объявлены, чтобы устройство могло использовать модуль NRF24L01p. Но как новичок в кодировании, я не очень знаком с синтаксисом и так далее. Я просто хочу сделать простой "Hello World". Но я застрял на этапе инициализации. Я следую некоторому учебнику с этого сайта https://technoblogiot.wordpress.com/2016/12/27/raspberry-pi-et-le-controller-driver/
Но это в Vb. Но я должен кодировать в C #.
Кто-нибудь может научить меня, как сделать такой шаг? Объявите настройки для nrf24L01. Заранее спасибо.
Команда и переменная в Vb
Пространство имен IS_nRF24L01p
Публичный класс nRF24L01P
Реализует IDisposable
Public NordicChipEnablePin As GpioPin
Public NordicSPI As SpiDevice
Public Sub New(SPI As SpiConnectionSettings, Speed As Integer, ChipEnablePin As Integer, InterruptPin As Integer)
Public Overridable Property timer_SPI As DispatcherTimer
Public Overridable Property NordicInterruptPin As GpioPin
'
' Summary:
' Occurs when data is successfully transmitted.
'
' Parameters:
' sender:
'
' e:
Public Event OnTransmitSuccess As OnTransmitSuccessEventHandler
'
' Summary:
' Occurs when data is received.
'
' Parameters:
' sender:
'
' e:
Public Event OnTransmitFailed As OnTransmitFailedEventHandler
'
' Summary:
' Occurs when data is received with bad payload.
'
' Parameters:
' sender:
'
' e:
Public Event OnDataReceiveFailed As OnDataReceiveFailedEventHandler
'
' Summary:
' Occurs when data is received.
'
' Parameters:
' sender:
'
' e:
Public Event OnDataReceived As OnDataReceivedEventHandler
Public Sub SetChipEnable(value As Boolean)
Public Sub Dispose() Implements IDisposable.Dispose
Public Sub FlushRXFIFO()
Public Sub WritePayload(data() As Byte)
Public Sub WriteRegister(register As Common.Registers, data() As Byte)
Public Sub SetRegisterBit(ByRef registerByte As Byte, value As Boolean, index As Integer)
Protected Overridable Sub Dispose(disposing As Boolean)
Public Function ReadRXFIFOWidth() As Byte
Public Function FlushTXFIFO() As Byte()
Public Function ReadRegister(register As Common.Registers, Optional size As Byte = 1) As Byte()
Public Function ReadFIFO(width As Byte) As Byte()
Public Class DataReceiveFailedEventArgs
Inherits EventArgs
Public DataPipe As Byte
Public Status As Byte
Public Sub New(DataPipe As Byte, Status As Byte)
End Class
Public Class DataReceivedEventArgs
Inherits EventArgs
Public DataPipe As Byte
Public Payload As Byte()
Public Sub New(DataPipe As Byte, Payload() As Byte)
End Class
Public Class DataTransmitFailedEventArgs
Inherits EventArgs
Public Status As Byte
Public Sub New(Status As Byte)
End Class
Public Delegate Sub OnDataReceivedEventHandler(sender As Object, e As DataReceivedEventArgs)
Public Delegate Sub OnDataReceiveFailedEventHandler(sender As Object, e As DataReceiveFailedEventArgs)
Public Delegate Sub OnTransmitFailedEventHandler(sender As Object, e As DataTransmitFailedEventArgs)
Public Delegate Sub OnTransmitSuccessEventHandler(sender As Object, e As EventArgs)
End Class
Конечное пространство имен
Все, что мне нужно сделать, это объявить это в C #
Public NotInheritable Class MainPage
Inherits Page
Public WithEvents MTPNordic As nRF24L01P
Public Sub New()
InitializeComponent()
Setup()
End Sub
Private Sub Setup()
Debug.WriteLine("Program Started")
Debug.WriteLine("Initialize MTPNordic")
MTPNordic = New nRF24L01P(New SpiConnectionSettings(0), 3000000, 12, 13)
End Sub
Команда и переменная в C #
using System;
using System.Diagnostics;
using System.Runtime.CompilerServices;
using System.Threading.Tasks;
using Windows.Devices.Gpio;
using Windows.Devices.Spi;
using Windows.UI.Xaml;
namespace IS_nRF24L01p
{
public class nRF24L01P : IDisposable
{
public GpioPin NordicChipEnablePin;
public SpiDevice NordicSPI;
public nRF24L01P();
public virtual DispatcherTimer timer_SPI { get; set; }
public virtual GpioPin NordicInterruptPin { get; set; }
//
// Summary:
// Pipe 5 address. Takes only the LSB. Data pipes 1-5 share the most significant
// address bytes.
public byte Pipe_5_Address { get; set; }
//
// Summary:
// Pipe 4 address. Takes only the LSB. Data pipes 1-5 share the most significant
// address bytes.
public byte Pipe_4_Address { get; set; }
//
// Summary:
// Pipe 3 address. Takes only the LSB. Data pipes 1-5 share the most significant
// address bytes.
public byte Pipe_3_Address { get; set; }
//
// Summary:
// Pipe 2 address. Takes only the LSB. Data pipes 1-5 share the most significant
// address bytes.
public byte Pipe_2_Address { get; set; }
//
// Summary:
// Pipe 1 address. 5 bytes maximum.
public byte[] Pipe_1_Address { get; set; }
//
// Summary:
// Pipe 0 address. 5 bytes maximum.
public byte[] Pipe_0_Address { get; set; }
//
// Summary:
// RF Speed
public Common.RFSpeed Speed { get; set; }
//
// Summary:
// RF address width.
public Common.AddressWidth AddressWidth { get; set; }
//
// Summary:
// RF channel frequency. It determines the center of the channel used by the nRF24L01p.
// Number from 0 to 125 are allowed.
public byte ChannelFreq { get; set; }
//
// Summary:
// RF db Power
public Common.dbPower dbPower { get; set; }
//
// Summary:
// Occurs when data is successfully transmitted.
//
// Parameters:
// sender:
//
// e:
public event OnTransmitSuccessEventHandler OnTransmitSuccess;
//
// Summary:
// Occurs when data is received.
//
// Parameters:
// sender:
//
// e:
public event OnTransmitFailedEventHandler OnTransmitFailed;
//
// Summary:
// Occurs when data is received with bad payload.
//
// Parameters:
// sender:
//
// e:
public event OnDataReceiveFailedEventHandler OnDataReceiveFailed;
//
// Summary:
// Occurs when data is received.
//
// Parameters:
// sender:
//
// e:
public event OnDataReceivedEventHandler OnDataReceived;
public void Dispose();
//
public void FlushRXFIFO();
//
public byte[] FlushTXFIFO();
//
// Parameters:
// SPI:
//
// Speed:
//
// ChipEnablePin:
//
// InterruptPin:
//
// SPIDesc:
[AsyncStateMachine(typeof(VB$StateMachine_71_InitNordicSPI))]
[DebuggerStepThrough]
public Task InitNordicSPI(SpiConnectionSettings SPI, int Speed, int ChipEnablePin, int InterruptPin, string SPIDesc = "");
//
// Parameters:
// width:
public byte[] ReadFIFO(byte width);
//
// Parameters:
// register:
//
// size:
public byte[] ReadRegister(Common.Registers register, byte size = 1);
//
public byte ReadRXFIFOWidth();
//
// Summary:
// Used to send data to another nRF24L01p enabled module
//
// Parameters:
// Message:
// Bytes array containing the message to send
//
// TX_ADDR:
// Bytes array containing the address of destination device
public void SendPayload(byte[] Message, ref byte[] TX_ADDR);
//
// Summary:
// Set the nRF24L01p as a Receiver
public void SetAsPRX();
//
// Summary:
// Set the nRF24L01p as a Transmitter
//
// Parameters:
// TX_ADDR:
public void SetAsPTX(ref byte[] TX_ADDR);
//
// Parameters:
// value:
public void SetChipEnable(bool value);
//
// Parameters:
// registerByte:
//
// value:
//
// index:
public void SetRegisterBit(ref byte registerByte, bool value, int index);
//
// Parameters:
// data:
public void WritePayload(byte[] data);
//
// Parameters:
// register:
//
// data:
public void WriteRegister(Common.Registers register, byte[] data);
protected virtual void Dispose(bool disposing);
public class DataReceiveFailedEventArgs : EventArgs
{
public byte DataPipe;
public byte Status;
public DataReceiveFailedEventArgs(byte DataPipe, byte Status);
}
public class DataReceivedEventArgs : EventArgs
{
public byte DataPipe;
public byte[] Payload;
public DataReceivedEventArgs(byte DataPipe, byte[] Payload);
}
public class DataTransmitFailedEventArgs : EventArgs
{
public byte Status;
public DataTransmitFailedEventArgs(byte Status);
}
public delegate void OnDataReceivedEventHandler(object sender, DataReceivedEventArgs e);
public delegate void OnDataReceiveFailedEventHandler(object sender, DataReceiveFailedEventArgs e);
public delegate void OnTransmitFailedEventHandler(object sender, DataTransmitFailedEventArgs e);
public delegate void OnTransmitSuccessEventHandler(object sender, EventArgs e);
}
}