Я использую MAC OS Yosemite и хочу отправить файл размером 17 МБ в мою учетную запись github.Я пробовал оба git через ssh и через https, и оба не работали.GIT_TRACE=1 GIT_CURL_VERBOSE=1 git push -u origin master возвращается в виде последних 6 строк:
Counting objects: 243, done.
Delta compression using up to 4 threads.
Compressing objects: 100% (118/118), done.
packet_write_wait: Connection to 192.30.253.113 port 22: Broken pipe
fatal: The remote end hung up unexpectedly
fatal: The remote end hung up unexpectedly
В поисках решения моей проблемы я начал задавать параметры TCPKeepAlive, ServerAlive, ClientAlive в различных конфигурационных скриптах, заканчивающихся на: In ~/.ssh/config:
Host github.com
PubKeyAuthentication yes
IdentityFile ~/.ssh/id_rsa.pub
ServerAliveInterval 300
TCPKeepAlive no
#ServerAliveCountMax 2400
В /etc/sshd_config:
# $OpenBSD: sshd_config,v 1.89 2013/02/06 00:20:42 dtucker Exp $
# This is the sshd server system-wide configuration file. See
# sshd_config(5) for more information.
# This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin
# The strategy used for options in the default sshd_config shipped with
# OpenSSH is to specify options with their default value where
# possible, but leave them commented. Uncommented options override the
# default value.
# See sshd_config(5) for details on setting the Port and Listen values on Mac OS X
#Port 22
#AddressFamily any
#ListenAddress 0.0.0.0
#ListenAddress ::
# The default requires explicit activation of protocol 1
#Protocol 2
# HostKey for protocol version 1
#HostKey /etc/ssh/ssh_host_key
# HostKeys for protocol version 2
#HostKey /etc/ssh/ssh_host_rsa_key
#HostKey /etc/ssh/ssh_host_dsa_key
#HostKey /etc/ssh/ssh_host_ecdsa_key
# Lifetime and size of ephemeral version 1 server key
#KeyRegenerationInterval 1h
#ServerKeyBits 1024
# Logging
# obsoletes QuietMode and FascistLogging
SyslogFacility AUTHPRIV
#LogLevel INFO
# Authentication:
#LoginGraceTime 2m
#PermitRootLogin yes
#StrictModes yes
#MaxAuthTries 6
#MaxSessions 10
#RSAAuthentication yes
#PubkeyAuthentication yes
# The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2
# but this is overridden so installations will only check .ssh/authorized_keys
AuthorizedKeysFile .ssh/authorized_keys
#AuthorizedPrincipalsFile none
#AuthorizedKeysCommand none
#AuthorizedKeysCommandUser nobody
# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
#RhostsRSAAuthentication no
# similar for protocol version 2
#HostbasedAuthentication no
# Change to yes if you don't trust ~/.ssh/known_hosts for
# RhostsRSAAuthentication and HostbasedAuthentication
#IgnoreUserKnownHosts no
# Don't read the user's ~/.rhosts and ~/.shosts files
#IgnoreRhosts yes
# To disable tunneled clear text passwords both PasswordAuthentication and
# ChallengeResponseAuthentication must be set to "no".
#PasswordAuthentication no
#PermitEmptyPasswords no
# Change to no to disable s/key passwords
#ChallengeResponseAuthentication yes
# Kerberos options
#KerberosAuthentication no
#KerberosOrLocalPasswd yes
#KerberosTicketCleanup yes
# GSSAPI options
#GSSAPIAuthentication no
#GSSAPICleanupCredentials yes
#GSSAPIStrictAcceptorCheck yes
#GSSAPIKeyExchange no
# Set this to 'yes' to enable PAM authentication, account processing,
# and session processing. If this is enabled, PAM authentication will
# be allowed through the ChallengeResponseAuthentication and
# PasswordAuthentication. Depending on your PAM configuration,
# PAM authentication via ChallengeResponseAuthentication may bypass
# the setting of "PermitRootLogin without-password".
# If you just want the PAM account and session checks to run without
# PAM authentication, then enable this but set PasswordAuthentication
# and ChallengeResponseAuthentication to 'no'.
# Also, PAM will deny null passwords by default. If you need to allow
# null passwords, add the " nullok" option to the end of the
# securityserver.so line in /etc/pam.d/sshd.
#UsePAM yes
#AllowAgentForwarding yes
#AllowTcpForwarding yes
#GatewayPorts no
#X11Forwarding no
#XauthLocation xauth # Default is to search $PATH (set by launchd(8)). It is recommended that a full path be provided.
#X11DisplayOffset 10
#X11UseLocalhost yes
#PrintMotd yes
#PrintLastLog yes
TCPKeepAlive yes
#UseLogin no
UsePrivilegeSeparation sandbox # Default for new installations.
#PermitUserEnvironment no
#Compression delayed
#ClientAliveInterval 0
#ClientAliveCountMax 3
#UseDNS yes
#PidFile /var/run/sshd.pid
#MaxStartups 10:30:100
#PermitTunnel no
#ChrootDirectory none
#VersionAddendum none
# pass locale information
AcceptEnv LANG LC_*
# no default banner path
#Banner none
# override default of no subsystems
Subsystem sftp /usr/libexec/sftp-server
# Example of overriding settings on a per-user basis
#Match User anoncvs
# X11Forwarding no
# AllowTcpForwarding no
# ForceCommand cvs server
# XAuthLocation added by XQuartz (http://xquartz.macosforge.org)
XAuthLocation /opt/X11/bin/xauth
Host *
ClientAliveCountMax 4
ClientAliveInterval 600
Тем не менее, добавление параметров ClientAlive в /etc/sshd_config и параметров ServerAlive в ~/.ssh/config не может решить мою проблему.Я перезапустил службу sshd, используя:
sudo launchctl unload /System/Library/LaunchDaemons/ssh.plist
и sudo launchctl load -w /System/Library/LaunchDaemons/ssh.plist
ssh -T git@github.com Возвращает: Вы успешно прошли аутентификацию, но GitHub не предоставляет доступ к оболочке.
Итак, я попытался перейти на git через https с помощью:
git remote set-url origin https://github.com/<my username>/<my repo>
и установить размер postBuffer на 30 МБ:
git config --global http.postBuffer 30M
А затем GIT_TRACE = 1 GIT_CURL_VERBOSE = 1 gitpush -u origin master возвращает:
...
* Couldn't find host github.com in the .netrc file; using defaults
* NTLM-proxy picked AND auth done set, clear picked!
* Hostname github.com was found in DNS cache
* Trying 192.30.253.113...
* Connected to github.com (192.30.253.113) port 443 (#1)
* SSL re-using session ID
* TLS 1.2 connection using TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256
* Server certificate: github.com
* Server certificate: DigiCert SHA2 Extended Validation Server CA
* Server certificate: DigiCert High Assurance EV Root CA
...
Host: github.com
Authorization: Basic Z3JvMW06YSooYitjKT1hKmIrYSpjTUc5MQ==
User-Agent: git/2.14.2
Accept-Encoding: gzip
Content-Type: application/x-git-receive-pack-request
Accept: application/x-git-receive-pack-result
Content-Length: 57811865
* SSLRead() return error -9820
* Closing connection 1
error: RPC failed; curl 56 SSLRead() return error -9820
fatal: The remote end hung up unexpectedly
fatal: The remote end hung up unexpectedly
Everything up-to-date
Так что я не знаю, как я могу загрузить свой файл через ssh или https.Поэтому я был бы рад, если бы кто-то мог предложить мне, что я мог бы попытаться успешно загрузить мой файл в Github.Еще лучше, если кто-нибудь скажет мне причину моей проблемы и ее решение.Спасибо!