Когда я был школьником, я обнаружил opencv/samples/cpp/stitching_detailed.cpp в папке образцов OpenCV.В то время мои навыки программирования были очень плохими.Я не могу понять это, хотя я ломал себе голову.Этот вопрос привлекает мое внимание и пробуждает мою память.After a whole night of hard work and debugging, I finally get it.
Основные шаги:
- С учетом трех изображений: blue.png , green.png ,и red.png
Мы можем получить результат сшивания (
result.png), используя
stitching_detailed.cpp ..
blender->blend(result, result_mask);
imwrite("result.png", result);
imwrite("result_mask.png", result_mask);
Я выбираю
centers из трех изображений и вычисляю
corresponding coordinates (деформированный) на вышиваемом изображении и
draw in solid следующим образом:
Warping images (auxiliary)...
Compensating exposure...
Blending ...
Warp each center point, and draw solid circle.
[408, 204] => [532, 224]
[408, 204] => [359, 301]
[408, 204] => [727, 320]
Check `result.png`, `result_mask.png` and `result2.png`!
Done!
Это функция calcWarpedPoint Я написал, чтобы вычислить деформированную точку на изображении для сшивания:
cv::Point2f calcWarpedPoint(
const cv::Point2f& pt,
InputArray K, // Camera K parameter
InputArray R, // Camera R parameter
Ptr<RotationWarper> warper, // The Rotation Warper
const std::vector<cv::Point> &corners,
const std::vector<cv::Size> &sizes)
{
// Calculate the wrapped point using camera parameter.
cv::Point2f dst = warper->warpPoint(pt, K, R);
// Calculate the stitching image roi using corners and sizes.
// the corners and sizes have already been calculated.
cv::Point2f tl = cv::detail::resultRoi(corners, sizes).tl();
// Finally adjust the wrapped point to the stitching image.
return cv::Point2f(dst.x - tl.x, dst.y - tl.y);
}
ЭтоПример кода:
std::cout << "\nWarp each center point, and draw solid circle.\n";
std::vector<cv::Scalar> colors = { {255,0,0}, {0, 255, 0}, {0, 0, 255} };
for (int idx = 0; idx < img_names.size(); ++idx) {
img = cv::imread(img_names[idx]);
Mat K;
cameras[idx].K().convertTo(K, CV_32F);
Mat R = cameras[idx].R;
cv::Point2f cpt = cv::Point2f(img.cols / 2, img.rows / 2);
cv::Point pt = calcWarpedPoint(cpt, K, R, warper, corners, sizes);
cv::circle(result, pt, 5, colors[idx], -1, cv::LINE_AA);
std::cout << cpt << " => " << pt << std::endl;
}
std::cout << "\nCheck `result.png`, `result_mask.png` and `result2.png`!\n";
imwrite("result2.png", result);
Полный код:
/*
* Author : Kinght-金(https://stackoverflow.com/users/3547485/)
* Created : 2019/03/01 23:00 (CST)
* Finished : 2019/03/01 07:50 (CST)
*
* Modified on opencv401/samples/cpp/stitching_detailed.cpp
* From https://github.com/opencv/opencv/blob/4.0.1/samples/cpp/stitching_detailed.cpp
*
*
* Description: A simple opencv(4.0.1) image stitching code for Stack Overflow answers.
* For /12500851/vychislit-koordinaty-iz-ishodnyh-izobrazhenii-posle-sshivaniyacomment96681412_54953792
*
*/
#include <iostream>
#include <fstream>
#include <string>
#include "opencv2/opencv_modules.hpp"
#include <opencv2/core/utility.hpp>
#include "opencv2/imgcodecs.hpp"
#include "opencv2/highgui.hpp"
#include "opencv2/stitching/detail/autocalib.hpp"
#include "opencv2/stitching/detail/blenders.hpp"
#include "opencv2/stitching/detail/camera.hpp"
#include "opencv2/stitching/detail/exposure_compensate.hpp"
#include "opencv2/stitching/detail/matchers.hpp"
#include "opencv2/stitching/detail/motion_estimators.hpp"
#include "opencv2/stitching/detail/seam_finders.hpp"
#include "opencv2/stitching/detail/warpers.hpp"
#include "opencv2/stitching/warpers.hpp"
using namespace std;
using namespace cv;
using namespace cv::detail;
//! img_names are the input image (full) paths
// You can download from using the links from the answer.
//! Blue: https://i.stack.imgur.com/Yz3U1.png
//! Green: https://i.stack.imgur.com/AbUTH.png
//! Red: https://i.stack.imgur.com/9wcGc.png
vector<String> img_names = {"D:/stitching/blue.png", "D:/stitching/green.png", "D:/stitching/red.png"};
//! The function to calculate the warped point on the stitching image.
cv::Point2f calcWarpedPoint(
const cv::Point2f& pt,
InputArray K, // Camera K parameter
InputArray R, // Camera R parameter
Ptr<RotationWarper> warper, // The Rotation Warper
const std::vector<cv::Point> &corners,
const std::vector<cv::Size> &sizes)
{
// Calculate the wrapped point
cv::Point2f dst = warper->warpPoint(pt, K, R);
// Calculate the stitching image roi using corners and sizes,
// the corners and sizes have already been calculated.
cv::Point2f tl = cv::detail::resultRoi(corners, sizes).tl();
// Finally adjust the wrapped point
return cv::Point2f(dst.x - tl.x, dst.y - tl.y);
}
int main(int argc, char* argv[])
{
double work_megapix = 0.6;
double seam_megapix = 0.1;
double compose_megapix = -1;
float conf_thresh = 1.f;
float match_conf = 0.3f;
float blend_strength = 5;
// Check if have enough images
int num_images = static_cast<int>(img_names.size());
if (num_images < 2)
{
std::cout << "Need more images\n";
return -1;
}
double work_scale = 1, seam_scale = 1, compose_scale = 1;
bool is_work_scale_set = false, is_seam_scale_set = false, is_compose_scale_set = false;
//(1) 创建特征查找器
Ptr<Feature2D> finder = ORB::create();
// (2) 读取图像，适当缩放，并计算图像的特征描述
Mat full_img, img;
vector<ImageFeatures> features(num_images);
vector<Mat> images(num_images);
vector<Size> full_img_sizes(num_images);
double seam_work_aspect = 1;
for (int i = 0; i < num_images; ++i)
{
full_img = imread(img_names[i]);
full_img_sizes[i] = full_img.size();
if (full_img.empty())
{
cout << "Can't open image " << img_names[i] << std::endl;
return -1;
}
if (!is_work_scale_set)
{
work_scale = min(1.0, sqrt(work_megapix * 1e6 / full_img.size().area()));
is_work_scale_set = true;
}
resize(full_img, img, Size(), work_scale, work_scale, INTER_LINEAR_EXACT);
if (!is_seam_scale_set)
{
seam_scale = min(1.0, sqrt(seam_megapix * 1e6 / full_img.size().area()));
seam_work_aspect = seam_scale / work_scale;
is_seam_scale_set = true;
}
computeImageFeatures(finder, img, features[i]);
features[i].img_idx = i;
std::cout << "Features in image #" << i + 1 << ": " << features[i].keypoints.size() << std::endl;
resize(full_img, img, Size(), seam_scale, seam_scale, INTER_LINEAR_EXACT);
images[i] = img.clone();
}
full_img.release();
img.release();
// (3) 创建图像特征匹配器，计算匹配信息
vector<MatchesInfo> pairwise_matches;
Ptr<FeaturesMatcher> matcher = makePtr<BestOf2NearestMatcher>(false, match_conf);
(*matcher)(features, pairwise_matches);
matcher->collectGarbage();
//! (4) 剔除外点，保留最确信的大成分
// Leave only images we are sure are from the same panorama
vector<int> indices = leaveBiggestComponent(features, pairwise_matches, conf_thresh);
vector<Mat> img_subset;
vector<String> img_names_subset;
vector<Size> full_img_sizes_subset;
for (size_t i = 0; i < indices.size(); ++i)
{
img_names_subset.push_back(img_names[indices[i]]);
img_subset.push_back(images[indices[i]]);
full_img_sizes_subset.push_back(full_img_sizes[indices[i]]);
}
images = img_subset;
img_names = img_names_subset;
full_img_sizes = full_img_sizes_subset;
// Check if we still have enough images
num_images = static_cast<int>(img_names.size());
if (num_images < 2)
{
std::cout << "Need more images\n";
return -1;
}
//!(5) 估计 homography
Ptr<Estimator> estimator = makePtr<HomographyBasedEstimator>();
vector<CameraParams> cameras;
if (!(*estimator)(features, pairwise_matches, cameras))
{
cout << "Homography estimation failed.\n";
return -1;
}
for (size_t i = 0; i < cameras.size(); ++i)
{
Mat R;
cameras[i].R.convertTo(R, CV_32F);
cameras[i].R = R;
std::cout << "\nInitial camera intrinsics #" << indices[i] + 1 << ":\nK:\n" << cameras[i].K() << "\nR:\n" << cameras[i].R << std::endl;
}
//(6) 创建约束调整器
Ptr<detail::BundleAdjusterBase> adjuster = makePtr<detail::BundleAdjusterRay>();
adjuster->setConfThresh(conf_thresh);
Mat_<uchar> refine_mask = Mat::zeros(3, 3, CV_8U);
refine_mask(0, 0) = 1;
refine_mask(0, 1) = 1;
refine_mask(0, 2) = 1;
refine_mask(1, 1) = 1;
refine_mask(1, 2) = 1;
adjuster->setRefinementMask(refine_mask);
if (!(*adjuster)(features, pairwise_matches, cameras))
{
cout << "Camera parameters adjusting failed.\n";
return -1;
}
// Find median focal length
vector<double> focals;
for (size_t i = 0; i < cameras.size(); ++i)
{
focals.push_back(cameras[i].focal);
}
sort(focals.begin(), focals.end());
float warped_image_scale;
if (focals.size() % 2 == 1)
warped_image_scale = static_cast<float>(focals[focals.size() / 2]);
else
warped_image_scale = static_cast<float>(focals[focals.size() / 2 - 1] + focals[focals.size() / 2]) * 0.5f;
std::cout << "\nWarping images (auxiliary)... \n";
vector<Point> corners(num_images);
vector<UMat> masks_warped(num_images);
vector<UMat> images_warped(num_images);
vector<Size> sizes(num_images);
vector<UMat> masks(num_images);
// Preapre images masks
for (int i = 0; i < num_images; ++i)
{
masks[i].create(images[i].size(), CV_8U);
masks[i].setTo(Scalar::all(255));
}
// Warp images and their masks
Ptr<WarperCreator> warper_creator = makePtr<cv::CylindricalWarper>();
if (!warper_creator)
{
cout << "Can't create the warper \n";
return 1;
}
//! Create RotationWarper
Ptr<RotationWarper> warper = warper_creator->create(static_cast<float>(warped_image_scale * seam_work_aspect));
//! Calculate warped corners/sizes/mask
for (int i = 0; i < num_images; ++i)
{
Mat_<float> K;
cameras[i].K().convertTo(K, CV_32F);
float swa = (float)seam_work_aspect;
K(0, 0) *= swa; K(0, 2) *= swa;
K(1, 1) *= swa; K(1, 2) *= swa;
corners[i] = warper->warp(images[i], K, cameras[i].R, INTER_LINEAR, BORDER_REFLECT, images_warped[i]);
sizes[i] = images_warped[i].size();
warper->warp(masks[i], K, cameras[i].R, INTER_NEAREST, BORDER_CONSTANT, masks_warped[i]);
}
vector<UMat> images_warped_f(num_images);
for (int i = 0; i < num_images; ++i)
images_warped[i].convertTo(images_warped_f[i], CV_32F);
std::cout << "Compensating exposure... \n";
//! 计算曝光度，调整图像曝光，减少亮度差异
Ptr<ExposureCompensator> compensator = ExposureCompensator::createDefault(ExposureCompensator::GAIN_BLOCKS);
if (dynamic_cast<BlocksCompensator*>(compensator.get()))
{
BlocksCompensator* bcompensator = dynamic_cast<BlocksCompensator*>(compensator.get());
bcompensator->setNrFeeds(1);
bcompensator->setNrGainsFilteringIterations(2);
bcompensator->setBlockSize(32, 32);
}
compensator->feed(corners, images_warped, masks_warped);
Ptr<SeamFinder> seam_finder = makePtr<detail::GraphCutSeamFinder>(GraphCutSeamFinderBase::COST_COLOR);
seam_finder->find(images_warped_f, corners, masks_warped);
// Release unused memory
images.clear();
images_warped.clear();
images_warped_f.clear();
masks.clear();
Mat img_warped, img_warped_s;
Mat dilated_mask, seam_mask, mask, mask_warped;
Ptr<Blender> blender;
double compose_work_aspect = 1;
for (int img_idx = 0; img_idx < num_images; ++img_idx)
{
// Read image and resize it if necessary
full_img = imread(img_names[img_idx]);
if (!is_compose_scale_set)
{
is_compose_scale_set = true;
compose_work_aspect = compose_scale / work_scale;
// Update warped image scale
warped_image_scale *= static_cast<float>(compose_work_aspect);
warper = warper_creator->create(warped_image_scale);
// Update corners and sizes
for (int i = 0; i < num_images; ++i)
{
cameras[i].focal *= compose_work_aspect;
cameras[i].ppx *= compose_work_aspect;
cameras[i].ppy *= compose_work_aspect;
Size sz = full_img_sizes[i];
if (std::abs(compose_scale - 1) > 1e-1)
{
sz.width = cvRound(full_img_sizes[i].width * compose_scale);
sz.height = cvRound(full_img_sizes[i].height * compose_scale);
}
Mat K;
cameras[i].K().convertTo(K, CV_32F);
Rect roi = warper->warpRoi(sz, K, cameras[i].R);
corners[i] = roi.tl();
sizes[i] = roi.size();
}
}
if (abs(compose_scale - 1) > 1e-1)
resize(full_img, img, Size(), compose_scale, compose_scale, INTER_LINEAR_EXACT);
else
img = full_img;
full_img.release();
Size img_size = img.size();
Mat K, R;
cameras[img_idx].K().convertTo(K, CV_32F);
R = cameras[img_idx].R;
// Warp the current image : img => img_warped
warper->warp(img, K, cameras[img_idx].R, INTER_LINEAR, BORDER_REFLECT, img_warped);
// Warp the current image mask
mask.create(img_size, CV_8U);
mask.setTo(Scalar::all(255));
warper->warp(mask, K, cameras[img_idx].R, INTER_NEAREST, BORDER_CONSTANT, mask_warped);
compensator->apply(img_idx, corners[img_idx], img_warped, mask_warped);
img_warped.convertTo(img_warped_s, CV_16S);
img_warped.release();
img.release();
mask.release();
dilate(masks_warped[img_idx], dilated_mask, Mat());
resize(dilated_mask, seam_mask, mask_warped.size(), 0, 0, INTER_LINEAR_EXACT);
mask_warped = seam_mask & mask_warped;
if (!blender)
{
blender = Blender::createDefault(Blender::MULTI_BAND, false);
Size dst_sz = resultRoi(corners, sizes).size();
float blend_width = sqrt(static_cast<float>(dst_sz.area())) * blend_strength / 100.f;
if (blend_width < 1.f){
blender = Blender::createDefault(Blender::NO, false);
}
else
{
MultiBandBlender* mb = dynamic_cast<MultiBandBlender*>(blender.get());
mb->setNumBands(static_cast<int>(ceil(log(blend_width) / log(2.)) - 1.));
}
blender->prepare(corners, sizes);
}
blender->feed(img_warped_s, mask_warped, corners[img_idx]);
}
/* ===========================================================================*/
// Blend image
std::cout << "\nBlending ...\n";
Mat result, result_mask;
blender->blend(result, result_mask);
imwrite("result.png", result);
imwrite("result_mask.png", result_mask);
std::cout << "\nWarp each center point, and draw solid circle.\n";
std::vector<cv::Scalar> colors = { {255,0,0}, {0, 255, 0}, {0, 0, 255} };
for (int idx = 0; idx < img_names.size(); ++idx) {
img = cv::imread(img_names[idx]);
Mat K;
cameras[idx].K().convertTo(K, CV_32F);
Mat R = cameras[idx].R;
cv::Point2f cpt = cv::Point2f(img.cols / 2, img.rows / 2);
cv::Point pt = calcWarpedPoint(cpt, K, R, warper, corners, sizes);
cv::circle(result, pt, 5, colors[idx], -1, cv::LINE_AA);
std::cout << cpt << " => " << pt << std::endl;
}
std::cout << "\nCheck `result.png`, `result_mask.png` and `result2.png`!\n";
imwrite("result2.png", result);
std::cout << "\nDone!\n";
/* ===========================================================================*/
return 0;
}
Некоторые ссылки могут быть полезны:
stitching_detailed.cpp: https://github.com/opencv/opencv/blob/4.0.1/samples/cpp/stitching_detailed.cpp
waper->warp(), warpPoint(), warpRoi() https://github.com/opencv/opencv/blob/master/modules/stitching/src/warpers.cpp#L153
resultRoi() https://github.com/opencv/opencv/blob/master/modules/stitching/src/util.cpp#L116
Другие ссылки могут быть интересны:
Преобразование кода переназначения opencv из c ++ в python
Разделение строк текста в отсканированном документе
Как использовать отношения между совпадениями Фланна для определения разумной гомографии?