Поскольку вы спрашиваете, как соединить текстуры, взгляните на эту модификацию этого урока хейна :
//
// This code was created by Jeff Molofee '99 (ported to Linux/GLUT by Richard Campbell '99)
//
// If you've found this code useful, please let me know.
//
// Visit me at www.demonews.com/hosted/nehe
// (email Richard Campbell at ulmont@bellsouth.net)
//
#include <GL/glut.h> // Header File For The GLUT Library
#include <GL/gl.h> // Header File For The OpenGL32 Library
#include <GL/glu.h> // Header File For The GLu32 Library
#include <stdio.h> // Header file for standard file i/o.
#include <stdlib.h> // Header file for malloc/free.
#include <unistd.h> // needed to sleep.
/* ascii code for the escape key */
#define ESCAPE 27
/* The number of our GLUT window */
int window;
/* floats for x rotation, y rotation, z rotation */
float xrot, yrot, zrot;
/* storage for one texture */
int texture[1];
/* Image type - contains height, width, and data */
struct Image {
unsigned long sizeX;
unsigned long sizeY;
char *data;
};
typedef struct Image Image;
// quick and dirty bitmap loader...for 24 bit bitmaps with 1 plane only.
// See http://www.dcs.ed.ac.uk/~mxr/gfx/2d/BMP.txt for more info.
int ImageLoad(char *filename, Image *image) {
FILE *file;
unsigned long size; // size of the image in bytes.
unsigned long i; // standard counter.
unsigned short int planes; // number of planes in image (must be 1)
unsigned short int bpp; // number of bits per pixel (must be 24)
char temp; // temporary color storage for bgr-rgb conversion.
// make sure the file is there.
if ((file = fopen(filename, "rb"))==NULL)
{
printf("File Not Found : %s\n",filename);
return 0;
}
// seek through the bmp header, up to the width/height:
fseek(file, 18, SEEK_CUR);
// read the width
if ((i = fread(&image->sizeX, 4, 1, file)) != 1) {
printf("Error reading width from %s.\n", filename);
return 0;
}
printf("Width of %s: %lu\n", filename, image->sizeX);
// read the height
if ((i = fread(&image->sizeY, 4, 1, file)) != 1) {
printf("Error reading height from %s.\n", filename);
return 0;
}
printf("Height of %s: %lu\n", filename, image->sizeY);
// calculate the size (assuming 24 bits or 3 bytes per pixel).
size = image->sizeX * image->sizeY * 3;
// read the planes
if ((fread(&planes, 2, 1, file)) != 1) {
printf("Error reading planes from %s.\n", filename);
return 0;
}
if (planes != 1) {
printf("Planes from %s is not 1: %u\n", filename, planes);
return 0;
}
// read the bpp
if ((i = fread(&bpp, 2, 1, file)) != 1) {
printf("Error reading bpp from %s.\n", filename);
return 0;
}
if (bpp != 24) {
printf("Bpp from %s is not 24: %u\n", filename, bpp);
return 0;
}
// seek past the rest of the bitmap header.
fseek(file, 24, SEEK_CUR);
// read the data.
image->data = (char *) malloc(size);
if (image->data == NULL) {
printf("Error allocating memory for color-corrected image data");
return 0;
}
if ((i = fread(image->data, size, 1, file)) != 1) {
printf("Error reading image data from %s.\n", filename);
return 0;
}
for (i=0;i<size;i+=3) { // reverse all of the colors. (bgr -> rgb)
temp = image->data[i];
image->data[i] = image->data[i+2];
image->data[i+2] = temp;
}
// we're done.
return 1;
}
// Load Bitmaps And Convert To Textures
void LoadGLTextures() {
// Load Texture
Image *image1;
// allocate space for texture
image1 = (Image *) malloc(sizeof(Image));
if (image1 == NULL) {
printf("Error allocating space for image");
exit(0);
}
if (!ImageLoad("Data/lesson6/NeHe.bmp", image1)) {
exit(1);
}
// Create Texture
glGenTextures(1, &texture[0]);
glBindTexture(GL_TEXTURE_2D, texture[0]); // 2d texture (x and y size)
glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_MAG_FILTER,GL_LINEAR); // scale linearly when image bigger than texture
glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_MIN_FILTER,GL_LINEAR); // scale linearly when image smalled than texture
// 2d texture, level of detail 0 (normal), 3 components (red, green, blue), x size from image, y size from image,
// border 0 (normal), rgb color data, unsigned byte data, and finally the data itself.
glTexImage2D(GL_TEXTURE_2D, 0, 3, image1->sizeX, image1->sizeY, 0, GL_RGB, GL_UNSIGNED_BYTE, image1->data);
};
/* A general OpenGL initialization function. Sets all of the initial parameters. */
void InitGL(int Width, int Height) // We call this right after our OpenGL window is created.
{
LoadGLTextures(); // Load The Texture(s)
glEnable(GL_TEXTURE_2D); // Enable Texture Mapping
glClearColor(0.0f, 0.0f, 1.0f, 0.0f); // Clear The Background Color To Blue
glClearDepth(1.0); // Enables Clearing Of The Depth Buffer
glDepthFunc(GL_LESS); // The Type Of Depth Test To Do
glEnable(GL_DEPTH_TEST); // Enables Depth Testing
glShadeModel(GL_SMOOTH); // Enables Smooth Color Shading
glMatrixMode(GL_PROJECTION);
glLoadIdentity(); // Reset The Projection Matrix
gluPerspective(45.0f,(GLfloat)Width/(GLfloat)Height,0.1f,100.0f); // Calculate The Aspect Ratio Of The Window
glMatrixMode(GL_MODELVIEW);
}
/* The function called when our window is resized (which shouldn't happen, because we're fullscreen) */
void ReSizeGLScene(int Width, int Height)
{
if (Height==0) // Prevent A Divide By Zero If The Window Is Too Small
Height=1;
glViewport(0, 0, Width, Height); // Reset The Current Viewport And Perspective Transformation
glMatrixMode(GL_PROJECTION);
glLoadIdentity();
gluPerspective(45.0f,(GLfloat)Width/(GLfloat)Height,0.1f,100.0f);
glMatrixMode(GL_MODELVIEW);
}
/* The main drawing function. */
void DrawGLScene()
{
glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); // Clear The Screen And The Depth Buffer
glLoadIdentity(); // Reset The View
glTranslatef(0.0f,0.0f,-5.0f); // move 5 units into the screen.
glRotatef(xrot,1.0f,0.0f,0.0f);
glBindTexture(GL_TEXTURE_2D, texture[0]); // choose the texture to use.
glBegin(GL_QUADS);
glTexCoord2f(0.0f, 0.0f); glVertex3f(-1.0f, -1.0f, 1.0f);
glTexCoord2f(0.5f, 0.0f); glVertex3f( 0.0f, -1.0f, 1.0f);
glTexCoord2f(0.5f, 1.0f); glVertex3f( 0.0f, 1.0f, 1.0f);
glTexCoord2f(0.0f, 1.0f); glVertex3f(-1.0f, 1.0f, 1.0f);
glTexCoord2f(0.5f, 0.0f); glVertex3f( 0.0f, -1.0f, 1.0f);
glTexCoord2f(1.0f, 0.0f); glVertex3f( 1.0f, -1.0f, 1.0f);
glTexCoord2f(1.0f, 1.0f); glVertex3f( 1.0f, 1.0f, 1.0f);
glTexCoord2f(0.5f, 1.0f); glVertex3f( 0.0f, 1.0f, 1.0f);
glEnd(); // done with the polygon.
xrot += 0.004;
// since this is double buffered, swap the buffers to display what just got drawn.
glutSwapBuffers();
}
int main(int argc, char **argv)
{
/* Initialize GLUT state - glut will take any command line arguments that pertain to it or
X Windows - look at its documentation at http://reality.sgi.com/mjk/spec3/spec3.html */
glutInit(&argc, argv);
/* Select type of Display mode:
Double buffer
RGBA color
Alpha components supported
Depth buffer */
glutInitDisplayMode(GLUT_RGBA | GLUT_DOUBLE | GLUT_ALPHA | GLUT_DEPTH);
/* get a 640 x 480 window */
glutInitWindowSize(640, 480);
/* the window starts at the upper left corner of the screen */
glutInitWindowPosition(0, 0);
/* Open a window */
window = glutCreateWindow("Jeff Molofee's GL Code Tutorial ... NeHe '99");
/* Register the function to do all our OpenGL drawing. */
glutDisplayFunc(&DrawGLScene);
/* Even if there are no events, redraw our gl scene. */
glutIdleFunc(&DrawGLScene);
/* Register the function called when our window is resized. */
glutReshapeFunc(&ReSizeGLScene);
/* Initialize our window. */
InitGL(640, 480);
/* Start Event Processing Engine */
glutMainLoop();
}
В частности, на функцию DrawGLScene(), где я разбилквадрат на 2 части и обратите внимание на координаты текстуры.